Recommended 1-1/4" Ball Mount with 6" Rise
Question:
Can you help me find: Class 1 Trailer Hitch Ball Mount, Fits 1-1/4-Inch Receiver, 6-Inch Rise, 2 ball car hitch height 10, coupler height 16, Towing 1000# tear Thank you!
asked by: Kristine P
0
Expert Reply:
The Curt Drawbar for 1-1/4" Hitches part # C45028 (5-3/8" Rise) is the most amount of rise we offer for a standard ball mount that fits a 1-1/4" trailer hitch receiver. The 2" Hitch Ball can then be added with part # C40018. The 5/8" difference in height won't be a real issue and it's the best you will be able to get.
expert reply by:
Conner L
0
Products Referenced in This Question
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- CURT
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Shop: Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
- Shop: Lock N Roll Articulating Hitch w/ 3-Position Channel - 1-1/4" Receivers - Vehicle Side - 2.5K
- Shop: Brake Controller
- Shop: Lock N Roll Articulating Coupler - A-Frame - Trailer Side - 11K
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Video: Best Ball Mount Options
- Search Results: 1.25 to 2 hitch adapter
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Shop: Transmission Cooler
- Search Results: 2" hitch ball
- Search Results: weld on coupler
- Q&A: Maximum Towing Capacity and Parts Needed to Tow a Waverunner with a 2017 Honda Accord
- Q&A: Is Class l Ball Mount Available With 6-Inch Rise
- Video: Review of Shocker Hitch Hitch Fabrication Parts - Trailer Tongue Vertical Channel Weld On - SHK95RR
- Video: Lock N Roll Ball Mounts - Adjustable Ball Mount - 336VS511 Review
- Video: Draw-Tite Long Shank 2 Inch Hitch Ball Review
- Shop: Base Plate for Tow Bar
- Shop: Roof Rack
- Q&A: Can I Back Up Normally When Using a Lock N Roll Trailer Coupler
- Q&A: Curt RockerBall Shock Absorbing 2" Ball For 800LB Trailer Pulled by 2010 Subaru Forester 2" Receiver
- Q&A: Trailer Hitch Vertical Adjustment For Lock N Roll Coupler
- Q&A: Can Lock N Roll Articulating Coupler and Hitch Be Used on a Trailer Traveling on Highways
- Q&A: How to Level Trailer With Lock N Roll Articulating Trailer Coupler
- Video: Best 2017 Honda Accord Hitch Options
- Video: Curt Trailer Hitch Installation - 2017 Honda Accord