Trailer Hitch Installation - 2009 Toyota Corolla - Curt Video

The Curt Trailer Hitch Receiver part #C11265 is what I recommend for a 2017 Toyota Corolla. It has a 1-1/4" opening for use with hitch mounted accessories like bike racks and cargo carriers. It has a 200 lb tongue weight rating which will…

For your 2006 Toyota Corolla Sport, I recommend using the Curt Trailer Hitch Receiver part #C11265. This hitch hangs down lower on the vehicle in comparison to the Draw-Tite Sportframe Trailer Hitch Receiver part #24913. As you can see in the…

Brake controller wiring adapter #3035-P is the correct one for use with a Prodigy P3 controller #90195 in a 2016 Ford Explorer equipped with the factory 7-way trailer socket. This wiring adapter plugs in at the back of the controller and at the brake…

Due to vehicle manufacturers having a loose tolerance for mounting the hangers that suspend the exhaust system, occasionally people will run into this issue when installing a hitch. Because of this, we have come up with a help article that lists a…

In order to install a hitch on a vehicle with rusted weld nuts, the first step would be to clean them with a lubricant and wire brush. If the bolt will still not thread into the weld nuts you will need to clean them out further with a thread tap. A…

In my opinion you are going in the right direction with a frame mounted receiver. The only advantage to a weld on application is that, if welded properly, the attachment point, weld, will be stronger than the hitch or trailer frame steel and one of…

Long story short, yes you can. But going with the ST205/75R14 would be a better replacement than a ST205/75D14 because the R in the first size means it is a radial tire whereas the D in the second size means it is a bias ply. The main difference…

You are correct, the Curt and Draw-Tite receiver hitches all look very similar and also offer the same weight capacities. The biggest difference between the two brands of receiver hitches for your 2008 Toyota Corolla is the fact that the Curt,…

Each hitch that is available for a 2007 Toyota Corolla is a Class I hitch with a 1-1/4" receiver such as the Draw-Tite #24913. According to the '07 Corolla's owners manual, the towing capacity of the vehicle is 1,500 lbs, which is why…

Tongue weight represents the maximum amount of downward force that can be safely suspended from the hitch, whether it be tongue load applied from a trailer coupler, or a hitch mounted accessory like a bike rack or a cargo carrying tray like the…

Yes the installation of either trailer hitch that fits your 2010 Toyota Corolla, the Curt #C11265 as well as the Draw-Tite #24913 will cover the jack point. It will still be possible to jack your Corolla up with the jack that came with the car, you…

Channel Tongue Trailer Coupler #CT-3001-Z requires a 2 inch wide tongue but I recommend a boxed tongue and not C-channel so there is more support where it counts. Steel tubing at least 1/8 of an inch of wall thickness will do the trick. The length…