Curt High-Low Tow Bar Adapter Review Video

The Curt High-Low Adapter #C26FV actually doesn't have a tongue weight rating because it is only designed to handle the tongue weight of a tow bar. Aside from that it will pull up to 7,500 lbs of weight behind your RV for a flat towing setup…

The best hitch solution for your 2012 Jeep Wrangler to carry a bike rack would be the etrailer part #e98856 as it has the longest hitch tube which allows bike racks to have the best clearance past the rear spare. Based on the dimensions of the…

There is not a recommended psi level when using Firestone Ride-Rite Air Helper Springs #F2709 with the exception the minimum 5 psi and maximum 150psi. It sounds like 70 psi gets you to level, which is ideal for towing. If 100 psi is more comfortable,…

The Roadmaster High-Low Adapter for Tow Bars #RM-076 that you referenced would be perfectly for what you need. It will give you the 6 inches of drop and will also extend the ball mount out an additional 10-1/4 inches.

You may be able to use something like the Brophy Bumper Mount Spare Carrier #BR56VR, which is approved for use on the rear of a motor home and will accept wheels up to 17-1/2" in diameter. This carrier can fit on 4" x 4" or 4-1/2"…

Your photo did not come through, but if you are sure your scooter will fit inside the 24x60 Curt Cargo Carrier for 2" Hitches #C18152, I do have a suggestion for tie-downs. What I recommend are motorcycle tie-downs, as these will work with your…

Blue Ox and Roadmaster both make really nice flat towing equipment overall. You can't really go wrong with either setup so it's easy to maybe pick a favorite one day and then a different the next. That said, I personally like the Blue Ox tow…

If you are using the GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out - 34 cu ft - 300 lbs - Dark Gray, part #HGK819, at its maximum length, you will need to add a hitch extender to your 2022 Ram 3500 in order to provide the…

The curve in the Malone Anti-Rattle HitchLock System part #MPG908 is designed for extra stability to not allow the shank of the accessory to move up and down. It is what holds the shank of accessory tight. I have attached a photo of how this is…

There isn't a wheel or similar product available that is designed to mount to a tow bar like what you have. Your best option to prevent the tow bar from bottoming out is to simply see if a different high-low adapter like #RM-048-6 might give you…

Ideally your tow bar will be level when it is connected to both your motorhome and your vehicle's base plates. At most it can be 3-inches high or low on either end. Based on your dimensions the 6-1/2-inch height difference you have means…

The Reese Weight Dist Shank part #RP3215 will work with the Fastway e2 Weight Distribution System but I recommend using the Fastway e2 Weight Distribution Shank part #FA92-02-4315 as this shank is specifically designed to be used with Fastway weight…