Curt Class II Drawbar Review C45518 Video

Customers compare C45518 to these similar products

Reese Trailer Hitch Starter Ball Mount Kit

(32)

$42.71

Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K

(2461)

$29.50

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

(2133)

$23.45

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K

(2133)

$34.58

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2133)

$36.14

Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K

(2133)

$28.48

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs

(2133)

$23.08

Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs

(2133)

$41.17

Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs

(2461)

$31.46

Curt Ball Mount for 2" Hitches - 7" Rise, 8" Drop - 9-3/8" Long - 12,000 lbs

(269)

$77.57

Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K

(2133)

$34.38

Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K

(305)

$65.73

Draw-Tite Drawbar for 1-1/4" Hitches - 4-3/4" Drop - 7-1/2" Long - 3,500 lbs

(44)

$42.48

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(1994)

$52.00

B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 18K

(518)

$389.00

Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs

(1994)

$41.38

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs

(2133)

$31.76

Brophy Anti-Rattle Drawbar, 1-1/4" Hitch, 5-1/2" Rise / 6" Drop, 7-1/4" L, 3.5K

(305)

$75.37

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black

(3867)

$269.00

Curt Class II Drawbar - 3-7/8" Rise - 13-1/2" Long - 3,500 lbs

(1994)

$28.54

Products Featured in this Video

Review of the Curt Class II Drawbar C45518

Hello neighbors, it's Brad here at etrailer and today we're taking a look at the Curt Ball Mount for inch and a quarter inch hitches. Now this ball mount allows us to have a 3/4 inch rise like we have here with our trailer hooked up, which makes it nice and level, so that works out really well. But if you do have a trailer that sits a little bit lower, you still have the opportunity to flip this… see more >

Info for this part was:

Video Edited:

Jacob T

Video by:

Dustin K

Installed by:

Cole B

Installed by:

Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular

Videos

Help Articles

Expert Answers

Curt Ball Mounts - Fixed Ball Mount - C45518 Review

Curt Trailer Hitch Installation - 2017 Honda Accord

Hopkins Tow Doctor Trailer End Test Unit Review

Best 2017 Honda Accord Hitch Options

Choosing the Right Trailer Wiring

Reese Trailer Hitch Starter Ball Mount Kit Review

Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56299 Review

Curt Ball Mounts - Fixed Ball Mount - C45503 Review

Hopkins Tow Doctor Vehicle End Test Unit Review

Curt Class II Drawbar Review C45503

Curt LED 4-Way Flat Connector Vehicle End Tester Review

Curt Stainless Steel 2 Inch Hitch Ball Review A-82

How to Measure for Trailer Hitch Drop

Trailer Hitch Installation Tips

Flat Towing Package for 2016-2017 Chevrolet Equinox and GMC Terrain

Trailer Wiring Diagrams

How to Choose the Right Trailer Hitch Class

What Do I Need To Tow A Trailer?

How Long is the Curt Class II Ball Mount D-55003/45503

Curt ball mount #C45503 measures approximately 7-3/4 to 7-13/16 inches from the center of the hitch pin hole to the center of the ball hole. From the center of the hitch pin hole to the nearest part of the welded-on ball platform it is…

view full answer...

What Size Hitch Pin do I Need for my Curt 1 1/4" Hitch

The Curt Trailer Hitch Receiver part #C11184 uses a 1/2" pin and clip like part #F-4.

view full answer...

4 Pole Circuit Tester Power Source

The power source used to test the Brophy Circuit Tester for 4-Pole Flat Trailer Connector #F4CT in the referenced video I included is the Tekonsha Bench Tester #7585. I've also included a review video for that product as well.

view full answer...

Trailer Wiring Harness Recommendation for 2017 Honda Accord Sedan

Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Even if those circuits are LED which do not draw that much relative to incandescent. Those vehicles need setup that draws power from…

view full answer...

For your 2017 Honda Accord Hybrid, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11496 is the best fit. There are only 1-1/4 inch hitch options for your vehicle and that will only allow a maximum of two bikes even if your…

view full answer...

Why is Powered 4-Pole Trailer Wiring Harness Necessary on 2016 Honda Accord with LED Lights

Some vehicles need a powered trailer wiring harness with a separate power wire (rather than the passive type that just plug-in) in order to protect the car's wiring. In the case of the 2016 Honda Accord sedan this is the type of harness required,…

view full answer...

The U-haul 5x8 trailer has a maximum GVWR (maximum recommended weight of trailer plus contents) of 2700 lbs. The trailer's tongue weight, which could be anywhere from 100 to 400 or so lbs will cause the rear suspension of your Highlander to squat…

view full answer...