Curt Adjustable 2-Ball Channel Mount Review Video

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

There are not many differences between a welded and forged weight distribution shank in regards to practicality. They both pass the same DOT standards and meet the maximum 15,000 lb weight capacity requirement. The forged shanks started to become…

Starting with the most significant difference here, the BulletProof Hitches Adjustable 2-Ball Mount #MD204 has a different rise/drop when compared to the Curt #C45900. The #MD204 has a 4" drop and a 4" rise while the #C45900 has a 6"…

The Fastway Flash E Series HD Adjustable Ball Mount #FA42-00-2925 referenced in your question has a distance of 16 inches from the top of the shank to the bottom of the unused hitch ball when set at its lowest position. This will certainly provide…

I have a great solution for you. Check out the Shocker Hitch XRC Cushioned Ball Mount for 2-1/2 inch hitches part #SHK94RR. This gives you 7-1/2" drop, so a little less than the Fastway kit, but since it does not carry the extra ball below the…

I have a solution for your 2-1/2 inch receiver on your 2016 Chevrolet Silverado 2500HD. Since you don't already have the trailer then the Fastway Solid-Tow Adjustable Ball Mount #DTSTBM6625 would be a great choice. This comes with 2 sized balls,…

Yes, the wheel of a motorcycle or bicycle can rest on an e-track no problem.

You can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track #EM09162 (this is a quantity of one strap but can be ordered in a pair at part #EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track…

The only internal pieces that are replaceable on a Diversi-Tech ball mount are the lock cores like what you mentioned with part #DTLBM02RK. Since this is the case you will need to replace the entire ball mount. I know this isn't the news you…

Yes, there is an option for an adjustable cushioned ball mount with 8 inches of drop that fits your 2-1/2 inch hitch, which is from Curt: - Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C57UR This ball mount fits 2-1/2 inch hitches, has…

The BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch - 6" Drop/Rise - 22,000 lbs #HD206 is an investment for sure, so I absolutely understand wanting to keep it protected when it's on your truck. We do have what you need to do…

The distance from the top of the shank to the bottom of the hitch ball at the lowest setting on the Curt Adjustable 2-Ball Channel Mount part #C45927 is 14-3/8". I went out to our warehouse to measure this for you.