BulletProof Hitches Adjustable 2-Ball Mount Installation - 2020 Ram 2500 Video

You absolutely can install air bags on your 2023 Ford F350 SRW Tremor. The Tremor package does have a few tweaks to the rear suspension, but nothing that will effect fitment of air bags. For you I recommend the Firestone Ride-Rite Air Helper…

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

There are not many differences between a welded and forged weight distribution shank in regards to practicality. They both pass the same DOT standards and meet the maximum 15,000 lb weight capacity requirement. The forged shanks started to become…

We have an adjustable ball mount for you. First, though, the BulletProof Adjustable Ball Mount that you referenced, part #HD258, has only an 8" drop. Unfortunately, that is not enough for your lowest trailer. The top of your receiver to the…

The BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch part #HD256 is sold as a complete unit, the shank is not available separately.

I sure do, the nice folks at Bulletproof Hitch provided a dimensional diagram for their #HD256 adjustable ball mount. I'll post the diagram for you so you can check it out. I've also linked to a demonstration video that you might find…

I reached out to B&W, who was able to give me the overall height and width of the B&W Tow & Stow 3-Ball Mount #BW54FR. They told me that overall, this ball mount measured 13-3/4 inches tall and 14 inches wide with the hitch balls in the…

To add a hitch with a 2-1/2" receiver to your 2018 Ford F-250, I recommend the Curt Trailer Hitch item #C15802. This hitch is custom fit and has a massive 20,000 lbs towing capacity and a 2,700 lbs maximum tongue weight. It can be used with a…

Probably the best option we offer would be the Trailer Valet XL part #TVXL2 which is designed for exactly what you are looking to do but it doesn't do great on grass if the ground is uneven at all or wet. Without seeing your exact setup I…

It sounds like you are looking for a long and low ball mount. BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch - 8" Drop/Rise #HD258 is my recommendation for you. From the center of the hitch pin hole to the center of the ball…

Yes, Gen-Y does strongly recommend using a stabilizer kit #325-GH-0100 with the Gen-Y Adjustable 2-Ball Mount #325-GH-316 if you end up using a drop setting of more than 12 inches. This ball mount setup in the lowest setting is 12-1/2 inches of drop…

The Gen-Y Adjustable Stabilizer Bar #325-GH-0100 is used with their Adjustable Ball Mounts like #325-GH-506 to prevent the twisting/torsional movement of the ball mount in the hitch tube when it is used in its maximum drop position. You still retain…