How Many Pairs of CE27672 Guide-Ons for Pontoon Boat Trailer

Question

Question:

Will one pair be sufficient or should I get two pair. We have a Coach 22ft on a Bear trailer.

asked by: Leonard T

0

Expert Reply:

One pair of guide-ons like the CE Smith # CE27672 should be sufficient as the V-shaped bunks should guide the pontoons in the rest of the way onto the trailer and keep everything properly aligned.

If you click the provided link, you can see a video of my buddy Randy walking through a typical installation.

expert reply by: Mike L

0

Answer 1

The great thing about boat trailers is that everybody tends to have a different setup and the amount of CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 you need really boils down to what you plan on having on your trailer. If you…

view full answer...

Answer 2

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers part #CE27672 can be installed at the rear of the trailer or towards the center. That said, the further back they are installed the better they will do to help guide the boat on. I have…

view full answer...

Answer 3

I wish we had a specific set of rollers for your pontoon scissor trailer but since there are so many different designs with boat trailers and everyone has a different idea of how to utilize the rollers it really boils down to what you are wanting…

view full answer...

Answer 4

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 can pretty easily be used on a tritoon pontoon like what you have.

view full answer...

Answer 5

We've had customers use the CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers #CE27670 on tri toon boats like yours that have the extra fins like yours have and they worked great. I attached a picture of this for you to check out as…

view full answer...

Answer 6

Post style guide ons like the part #CE27640 are designed to be visual aids and are not designed to be used as physical guides. For a pontoon application you would be better served with the CE Smith Roller Style Guide-Ons #CE27672 which can be used…

view full answer...

Answer 7

Though we do not have an option that would have a perfect 90 degree angle, I may still have something that would work. The CE Smith #CE27610 is a little smaller and typically installed on the outside of a trailer frame, but can be used however…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...