CargoSmart E-Track and X-Track System Tool Holder Review Video

The correct product to use to support the boards you plan on using to support the bed would be the E-Track Wood Beam Socket #59149. Since you will want to have the 2 by 4s on edge to support the plywood, and the only way the #59149 could be installed…

The CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long #3481788 will attach directly to the vertical metal frame on your trailer. You will use Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc…

The Erickson E-Track Wood Beam Socket you referenced, part #59149, will work with 2 x 4 lumber or the 2 x 6 material you intend to use. These are usable with either vertical, horizontal or single-slot E-Tracks. In your application you can use either…

Based on the colors of the wires that are on the lights you bought for your trailer is sounds like the assemblies ground through the mounting hardware, the brown wire is the running light circuit, and the red wire is the stop turn circuit. A…

I do have a towing mirror option for your 2018 Honda Ridgeline but a custom fit option is not yet available for your truck. The best option I have for you at this time is the K-Source Universal Towing Mirrors part #KS3891-2. The K-Source Universal…

I recommend the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR for your 2022 Ford F-250. This controller is a plug and play installation with the Wiring Harness #331-TPH-007. You can mount the control knob where you find it most convenient to…

From a tire point of view the #AM32253DX matches perfectly as it comes with a ST205/75D15 just like what you have. The bolt pattern is a 5 on 5 inch which isn't the most popular bolt pattern but if that's what you have the wheel would bolt…

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

All-around the Stromberg Carlson Electric Trailer Jack #JET-5000NG is nicer than the #JET-5000. The bearings in the part #JET-5000NG allow it to raise and lower much smoother and quicker, the size of the head is a bit smaller and the lighting is…

On a lot of powered a-frame jacks if you extend or retract them too far you end up warping the nut and screw that allows the jack to travel up and down. When this happens there isn't a way to fix it as the jack is permanently damaged. It's…

According to TST, once the repeater is installed, the sensors included with the #TST-507-INT-6-C will work within 5 minutes. My representative tells me that the expected battery life is 3-5 years, and once the battery goes dead, the sensor itself…

The working load limit for the E-Track system like the part #E19148 that you referenced is 2,000 lbs. There isn't a set method required for tightening a load to the E-Track. Basically you would want to use a properly rated strap for the weight of…