What is the Working Load Limit for the E-Track System
Question:
What is the tork ratio lbs per foot Is there a proper procedure to strap product down? Or is it until tight around product? Straps used on this system Can they pull the etrack away from the wall? What is the main support of the etrack system? We have over 1000 units and would like information.
asked by: Jeff S
Expert Reply:
The working load limit for the E-Track system like the part # E19148 that you referenced is 2,000 lbs. There isn't a set method required for tightening a load to the E-Track. Basically you would want to use a properly rated strap for the weight of the item and use your discretion to secure it in whatever manner works best. For a way to secure a strap to the E-Track you would want the E-Track D-Ring part # E59143.
Depending on how the E-Tracks were attached to the wall and the material the wall is made from you could pull the tracks away from the wall. If properly installed and used below the capacity of the E-Track this shouldn't be a problem.
The strength of the E-Track comes from its 12 gauge steel construction.
Products Referenced in This Question
Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs
- E-Track
- E-Track Anchor
- 1200 lbs
- Erickson
more information >
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- Shop: Suspension Enhancement
- Search Results: ratchet straps
- Search Results: e trac
- Search Results: e~track
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System
- Video: Erickson E-Track E-Chock Wheel Chocks Review
- Video: Erickson E-Chock Wheel Chock Manufacturer Review
- Video: Review of Erickson ATV-UTV Tie Downs - 4 E-Track Ratchet Straps and Wheel Chock Tie-Downs - EM98CV
- Shop: Towing Mirrors
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Q&A: Can the Strap from the Erickson ATV E-Track Tie-Down Kit Be Purchased Separate
- Q&A: What Size Bolts Do I Need For The Erickson ATV E-Track Tie-Down Kit
- Q&A: Why Are The Erickson Ratchet Straps EM98CV Falling Off My Tires
- Shop: Durabilt Load Bar for E-Track - 94-13/16" to 105-13/16" Long - 2,200 lbs
- Search Results: 7 way molded trailer wire connector
- Search Results: 7 way pigtail
- Search Results: clearance lights
- Q&A: Can E-Track Be Used To Secure a Car in a Trailer?
- Q&A: What Does Working Load Limit Mean for E-Track
- Q&A: Are the Erickson Horizontal E-Tracks Strong Enough for a 5,000 lb Vehicle
- Search Results: e~track rails
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM31199DX
- Video: WeatherTech Cargo Liner Installation - 2010 Chevy Cobalt
on E-Track
