Buyers Products Rails and Tie Rings Super Track Kit Review Video

I went to our warehouse and measured Curt Hitch #14055 to get you the mounting hole dimension you requested. The mounting hole spacing on the two flanges is 38-1/4-inches. The overall edge-to-edge spread at the two flanges is 40-inches.

A great majority of standard ball mounts are designed so that they can be used in either the drop or rise position. Using a ball mount like the Draw-Tite #2753 that you were looking at in the rise position is just a matter of turning it upside down…

I am not exactly sure which particular ball mount this is in reference to but the one you came from, the Draw-Tite Ball Mount for 2" Hitches part #2753 can be inverted to increase rise up to 2-3/4". This is the case for most ball…

A 145/80-12 tire such as that on tire and wheel combo #AM35351DX will be about 1 inch wider and about 0.8 inches taller than your existing 4.80x12 tires. Provided that you have enough space all around the existing tires to go to the larger size…

At the time the video was made, Kenda hadn't done speed rating testing on the tire, over and above the default figure of 65 mph. Since that time, Kenda has done additional testing and have found that the tire meets the criteria for an M…

In regards to upgrading, which for most means going with a larger wheel/tire combo, this is possible but you will be limited by the bolt pattern of the hubs. The 4 on 4" bolt pattern will allow for wheel sizes from 8-13". The best size…

The benefits of installing larger tires are somewhat related to clearance in every way with the exception of the possiblility of additional capacity, having a radial tire option if you increase wheel size, and having broadened options of style. The…

We don't have a floor length backing plate for the e-tracks. To do a flush mounted setup you could put a sub-floor in the trailer attach the e-track to that and then install the floor between the e-tracks to give it a flush type setup. With that…

I contacted buyers are there are not any installation instructions available at this time for the Buyers Products Super Track Kit part #337ST93. I went to the warehouse and made sure the rings in our stock would snap into the track. Depress the gold…

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

I recommend a 12 volt car battery rather than a breakaway battery because you may end up needing the larger battery down the road. What you will do is attach a battery box (see link for options) to the trailer frame. From the trailer side 7-Way…

What I recommend is taking your EX loader trailer to a local fabrication shop and having them add two crossbraces to the frame of your trailer where you are wanting to install the Buyers Products Utility Storage Box - Black - 44" x 19" x…