Air Lift LoadLifter Air Helper Springs Upgrade Kit Review Video

That is a great question. The air bags like the #AL88289 should be kept at the minimum of 5 PSI at all times, even when you are not towing. You will then load the truck or hook up your camper first. Once that is done you will inflate the bags to the…

Yes, the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs #AL52300 although designed for the LoadLifter 5000 and the LoadLifter 5000 Ultimate air springs will also work with the #AL57595 XL springs. Both kits…

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

The Air Lift WirelessONE Compressor System first generation 25870 and newer #AL25980 that you referenced are both considered water resistant and will handle limited exposure to water. Definitely don't want to submerge it but in most outside…

Based on my research a Big Tex 16ET trailer uses a 17.5" x 6.75" wheel with an 8-bolt lug pattern and uses ST215/75R17.5 load range H tires. The Provider 215/75R17.5 Radial Tire w/ 17-1/2" Silver Mod Wheel #TA95ZR you referenced is a…

The No-Drill Mount #18140 is the bracket you saw used in the photo for the Air Lift Upgrade Kit #AL52300 for the Air Lift LoadLifter 5000 Air Helper Springs #AL84JQ on your 2022 Toyota Tundra. The holes in the mount were drilled out larger to accept…

The Air Lift LoadLifter 5000 part #AL88289 that you referenced that fits your 2020 Ram 2500 is for versions of the truck that have coil spring rear suspension like what you see in the attached picture that shows it installed.

There will be no issues at all having stainless braided air lines already installed. The PTC-to-AN adapter fittings that will have come with the stainless lines, like the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate #AL52300,…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

From previous customers with the Grand Design Solitude S Class ST2930RL we know that know that it has the Lippert 1621 pin box model and since we know the GVWR of the RV is 15k so for a MORryde you'd want the part #MR84VR.

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

Yes, since Firestone and Air Lift use the same air line and connector styles you could use the Air Lift Upgrade Kit for LoadLifter 5000 and LoadLifter 5000 Ultimate Air Helper Springs #AL52300 on a Firestone kit like you have.