ABS Fasteners Trailer Shackle Bolt Locknut Review Video

We have the Bolt #LC126197 which is the bolt used for the shackle links. We also have the Bolt #LC126238 which connects the leaf springs to the hangers. The 7/16"-20 Flange Nut #LC122103 will fit both of these bolts. These are the parts for…

The hub ratings are for the axle capacity, and not the trailer weight capacity. For example, The trailer hubs you came from, part #AKIHUB-545-35-EZ-K is designed for 3,500 lb axles. This hub includes the bearings races, seals, grease cap, and lug…

No, that is not completely true. The wet bolts can be re-used as long as they are not rusted, cracked or damaged in any other way, to include the splines or threads being damaged. The main thing that you'd want to replace is the lock-nut which…

We don't carry Dexter leaf springs, but we do offer the 4,500, 26 inch long center eye to center eye equivalent as part #e27SR.

Often an axle's weight rating will appear on a sticker or plate on the axle beam itself, or sometimes the trailer's main identification sticker will include axle ratings. This is helpful unless of course the axles have been replaced during…

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

The wet bolt and shackle kit part #LC52SV that you want to use with the Road Armor #LC696740 does not come with leaf spring bushings but we can help with that. I believe what you are looking for is bronze bushings like the part #K71-291-00 as brass…

There are two different size shackle bolts that come with the MORryde Suspension Upgrade Kit for Triple Axle Trailers, part #MR92HR which is 2-15/16" long or part #MR52HR which is 3-3/8" long. The longer bolts are used on models with the…

The torque requirements for leaf spring u-bolts depend on the diameter of the u-bolts that are being used. If the gross weight of your tandem axle trailer is 7,000 lbs, then you likely have two 3,500 lb axles. Typically 1/2 inch diameter u-bolts are…

Yes the leaf spring part #e27SR would be the correct spring for your 4,000 Dexter axle. This is a very standard length trailer leaf spring at 26 inches and will work well on your trailer. Then for a U-bolt kit part #APUBR-1 would be what you'd…

For the 2 inch Square Trailer U-Bolt, part #SP01-160 you purchased, you can use nylon lock nuts that would work for a 9/16 bolt.You would want to make sure you use nuts of equal strength and that they match the thread and size.

The Dexter Single Axle Heavy Duty Suspension Kit #K71-403-00 uses the Shackle Bolt #007-126-01. The 9/16" portion of this bolt is 2-1/4" long.