Replacement Wet Bolts For Lippert Shackle Kit On Road Armor Suspension.

Question

Question:

Can I just buy a couple wet bolts for the road armor suspension system. I think they are 9/16 x 3 3/8 bolts.

asked by: Wayne G

0

Expert Reply:

We have the Bolt # LC126197 which is the bolt used for the shackle links. We also have the Bolt # LC126238 which connects the leaf springs to the hangers. The 7/16"-20 Flange Nut # LC122103 will fit both of these bolts. These are the parts for the Kit # LC52SV to mount the Road Armor # LC696740 equalizers.

expert reply by: Bud M

0

Answer 1

The wet bolt and shackle kit part #LC52SV that you want to use with the Road Armor #LC696740 does not come with leaf spring bushings but we can help with that. I believe what you are looking for is bronze bushings like the part #K71-291-00 as brass…

view full answer...

Answer 2

In regards to the Road Armor Shock Absorbing Equalizer Kits like part #LC696740, the only difference between the blue powder coated option and yellow powder coated option is that yellow denotes aftermarket and blue denotes factory. In other words,…

view full answer...

Answer 3

We don't carry Dexter leaf springs, but we do offer the 4,500, 26 inch long center eye to center eye equivalent as part #e27SR.

view full answer...

Answer 4

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 7

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 8

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 9

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Answer 10

There unfortunately isn't a guide to tell us the equalizer, shackle straps, and leaf spring sizing for your 2016 Grand Design Reflection 313RLTS so you'll need to a bit a of measuring to determine the best replacements. Before measuring…

view full answer...

Answer 11

The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the #MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according to…

view full answer...

Answer 12

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Replacement Wet Bolts For Lippert Shackle Kit On Road Armor Suspension.

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching