Yakima EasyRider Utility Trailer SpareTire Carrier Kit Manufacturer Product Tour Video

The slight gap you see is normal. The drum is not supposed to make contact with the brake mounting plate. There are some instances when mixing brands of brakes, hubs, and axles, that won't line up properly but in this case it is normal. I did…

The Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel part #AM32153 has a 0 offset which means the hub is centered in the wheel therefore the backspacing is around 3.25". Please keep in mind that a 205/75R14 tire is going to be…

The top of the Curt Trailer Hitch Mounted Spare Tire Carrier #c31006 will sit 9-1/2" out and 24" up from the center of the hitch pin hole on your 2004 Toyota Sienna. I don't have a way to verify whether this gives you enough clearance…

The Lippert Tailgate Storage System Mounting Kit part #LC432336 attaches to the frame which you can see below. Therefore, so long as the wall does not extend past the frame rails too much it should work. The included diagrams below should help to…

The Valterra RV Sewer Hose Carrier part #A04-5094BK could be used without the center support bracket. However, the bracket can actually be placed where you choose so it does not have to be in the direct center. This may then allow you to use the…

The outside width of the Lippert RV Spare Tire Carrier part #LC159041 measured where the mounting flanges are is 21-1/8 inches.

Using the Stromberg Carlson Bike Bunk, #CC-275 for a spare tire carrier, but instead of attaching a bike rack to the 2" receiver you use the etrailer Hitch Mounted Spare Tire Carrier for 2" hitches, #e98ZR is a viable option. It sounds as…

The Yakima Lock and Load Platform Tray part #Y05048 that you referenced could attach to the top bars of the Yakima EasyRider Trailer part #Y08129 since they are Yakima HD bars that have a top channel built into them but the lower bars of the trailer…

Yes, the same weight distribution hitch head is used for both the 8,000 lb. and 10,000 lb. Fastway systems. The correct head will be determined by the style of spring bar that you have. The Replacement Head for Fastway e2 Weight Distribution Systems…

I had the Saris Swing Away Hitch Extender for Bike Racks - 2" Hitches #SAR36VR measured and have some diagrams below that will help. I will say that the hinge will measure about 23 inches from the center of shank and will not extend past your…

I don't believe that center plate on the 96" Lippert Underchassis Double Bin Storage Unit #LC175180 would be strong enough to support Lippert Components Spare Tire Winch #LC159056 with a spare tire. I recommend installing a beam in-between…

There is an under-chassis storage unit that comes with a spare tire carrier, although the Lippert #LC175180 does not. Instead you will want the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier #LC125460 which is the same unit as the…