Which Trailer Wiring Harnesses will Fit a 2013 Honda CR-V

Question

Question:

The connectors supplied are too small for my connections. My connections are longer. Is there another harness option?

asked by: Christopher S

0

Expert Reply:

There are two trailer wiring harnesses confirmed to fit your 2013 Honda CR-V. They are the Tekonsha # 118561 and the Curt # C56158. The Tekonsha installs behind the tail lights and the Curt behind trim panels in the rear Cargo area.

I have included install videos and install videos for each harness for you to take a look at.

expert reply by: Charles S

0

Answer 1

There are a couple of differences between the wiring harnesses for your 2016 Ram ProMaster. The biggest difference is the technology used. The Curt #C56270 uses what is called Surface-Mount Technology. Essentially what this does is almost eliminate…

view full answer...

Answer 2

The owner's manual I found online for your 2013 Honda CR-V states that the towing capacity is indeed 1,500 pounds. For the tongue weight the manual then states that it should be no more than approximately 10 percent of the trailer's weight.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The towing capacity for your 2012 Honda CR-V is 1500-lbs. This really limits the items you are able to tow with your vehicle. The trailer hitch I recommend for your Honda is the Draw-Tite Max-Frame Trailer Hitch, part #75742. This is a Class llll…

view full answer...

Answer 5

Yes, you definitely can! To install a class III hitch on a 2013 Honda CR-V, I recommend the etrailer item #e98868. This hitch is custom fit and bolts to your Honda with included hardware. It has a 3,500 lbs towing capacity and a 350 lbs maximum…

view full answer...

Answer 6

We actually used a box cutter to cut the underbody plastic when we installed the etrailer.com Trailer Hitch Receiver #E98868 on a 2014 Honda CR-V. The linked instructions just call for a rotary tool so really anything that you are comfortable using,…

view full answer...

Answer 7

To trim the underbody panel on your 2013 Honda CR-V for the installation of a Curt Trailer Hitch Receiver #C13119, I recommend marking the area that needs to be cut to start with. I have provided a graphic showing where this section is and the…

view full answer...

Answer 8

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 9

For your 2014 Honda CR-V I highly recommend the Curt Class III Trailer Hitch Receiver #C13119 for a couple of reasons. All of the Class III custom hitches (I recommend going with a Class III not only for the extra capacity but for the larger 2"…

view full answer...

Which Trailer Wiring Harnesses will Fit a 2013 Honda CR-V

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching