Where to Install 10 Amp Fuse for Curt T-Connector on 2014 Honda CR-V

Question

Question:

Where do I put the fuse in on my 2014 CRV with the fuse box under the hood??

asked by: John H

0

Expert Reply:

When installing the Curt T-Connector # C56158 on your 2014 Honda CR-V you need to access the fuse panel under your dash and put the 10 amp fuse in position 10. I have attached a photo showing this as well as an installation video that you can check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

The fuse likely blew because either there was a short on the trailer wiring somewhere or the lights on the trailer draw more than 7.5 amps. The first things to check are the vehicle and trailer side connectors. Make sure each is free of dirt and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

The BrakeBuddy Towed Vehicle Battery Charge Kit part #BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part #HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.

view full answer...

Answer 9

The "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part #RM76511. This product will make it easy to deactivate this circuit, you will only need to flip a switch instead of…

view full answer...

Answer 10

In order to both carry bikes and flat-tow a vehicle at the same time, you'd need to use an adapter on the motorhomes hitch, I recommend the Roadmaster Dual Hitch Receiver Adapter like part #RM-077-2 as it's designed for this exact purpose. In…

view full answer...

Answer 11

The Rhino-Rack Vortex StealthBar Roof Rack #JA7970 actually has rubber coated stainless steel straps which secure it to the raised rails on your 2023 Subaru Outback Wilderness. So you won't have issues with the straps failing. If you are only…

view full answer...

Answer 12

Unless you are using a supplemental braking system like the Blue Ox Patriot #BLU37TR which draws power from a 12V outlet like part #RM-9332 then you would need the Charge Line Kit #RM-156-25 when the ACC fuse is pulled on your 2014 Honda CR-V. If you…

view full answer...