Why Does the Curt T-Connector Wiring Harness C56158 for a 2015 Honda CR-V Come With Two Fuses

Question

Question:

Why is this harness double fused?

asked by: Ray M

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness part # C56158 does come with two fuses, one that gets installed inline with the harness that protects the converter and then one that gets installed in the interior fuse box that protects the vehicle's wiring.

expert reply by: Conner L

0

Answer 1

Sounds like the fuse of the red fuse holder isn't installed in the harness to activate it. Without this the entire harness will not have power. There is also another fuse that needs to get installed under the dash. It is a 10 amp fuse that…

view full answer...

Answer 2

If you do not have a hitch you would first need one like part #75742. For a ball mount you could use the part #D-4 that you referenced as long as your trailer would require a 3/4 inch rise or 2 inch drop to be towed level. For more info on how to…

view full answer...

Answer 3

Curt does a really good job on the hitch side of things but when it comes to the electronic side of things they are definitely not my first choice simply because we tend to have more issues with their wiring simply giving out like what you…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wring Harness, #C56158, is designed to bypass pulling electric from your 2015 Honda CR-V's lighting wiring and get power directly from the vehicle's battery. The T-Connector harness includes a powered light…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Why Does the Curt T-Connector Wiring Harness C56158 for a 2015 Honda CR-V Come With Two Fuses

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching