Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118561 Review Video

The bolts that come with the Draw-Tite #75742 for your 2014 Honda CR-V are 10mm bolts. These are the hex bolts M10X 1.25X 30. I went ahead and attached the diagram that shows these bolts in the instructions and where they install. They are item #1…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It does seem rather odd that Draw-Tite #75742 would construct the hitch with a mount to attach a trailer connector mounting bracket when the trailer connector harnesses for the vehicle are designed to be installed so that the trailer connector is…

The drivers side bolts will not bolt through the appearance panel. There will be an 8-1/2 inch by 4-1/4 inch cutout in the appearance panel for the drivers side bolts. This cutout will give you enough room to bolt the hitch on and leave the…

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

BMWs and Hondas are very different vehicles so you would need a different hitch for the 2013 Honda CR-V to carry your Thule bike rack. You would want the Draw Tite Hitch part #75742 as this is a 2 inch hitch confirmed to fit your vehicle that would…

I'm not sure which year your Honda CR-V is but I saw you looked at the trailer hitch receiver that fits the CR-V from 2012 to 2016 so I checked a manual for the 2016 model. It states, on page 353, that the maximum towing capacity is 1,500 pounds…

We do have a photo of the Curt Hitch, part #C13119, on a 2012 Honda CR-V and I have posted it on the page. The most visible part will be the receiver opening and the front of the round crossbar. I have also linked the installation detail for this…

For your 2014 Honda CR-V I highly recommend the Curt Class III Trailer Hitch Receiver #C13119 for a couple of reasons. All of the Class III custom hitches (I recommend going with a Class III not only for the extra capacity but for the larger 2"…

If you just need the round 4-way trailer connector then you can use the Replacement 4-Wire Plug part #PK11404. However, you will still need the bracket part 299-0685 which is number 10 in the attached parts list in order to attach the 4-way to the…

We have several tow bar wiring harnesses for the 2014 Honda CR-V. I have included a link to the options that will fit. A brake light relay should not be required if you use the SMI Air Force One. It does look like you will need to pull a fuse to flat…

For the hardware used to install trailer hitches on your 2013 Honda CR-V it will depend on the hitch. Draw-Tite Class III hitch #75742 and Class II hitch #36520 use Hex Bolt M10X1.25X30 CL8.8 and a 3/8-16 U-Bolt. Curt trailer hitch #C11555 uses…