Trailer Wiring Harness Installation - 2015 Honda CR-V C56158 Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There are two trailer wiring harnesses confirmed to fit your 2013 Honda CR-V. They are the Tekonsha #118561 and the Curt #C56158. The Tekonsha installs behind the tail lights and the Curt behind trim panels in the rear Cargo area. I have included…

There are a couple of differences between the wiring harnesses for your 2016 Ram ProMaster. The biggest difference is the technology used. The Curt #C56270 uses what is called Surface-Mount Technology. Essentially what this does is almost eliminate…

The hardware used to mount the Draw-Tite #75742 are hex bolts with measurements M10 X 1.25 X 30 CL8.8. You can also get this hardware kit by putting that hitch model number on the page for our Replacement Hardware Kit #RHK and receive the correct…

The Curt T-Connector Vehicle Wiring Harness part #C56158 does come with two fuses, one that gets installed inline with the harness that protects the converter and then one that gets installed in the interior fuse box that protects the vehicle's…

Sounds like the fuse of the red fuse holder isn't installed in the harness to activate it. Without this the entire harness will not have power. There is also another fuse that needs to get installed under the dash. It is a 10 amp fuse that gets…

There was a big enough generation change between the 2016 and 2017 Honda CR-Vs that they had to create a new hitch fit. So for your 2018 you'd need the part #76128 that you referenced as the hitch from a 2015 would not fit.

Your 2015 Honda CRV has a towing capacity of 1500 lbs max. The 2017 Aliner Scout has an unloaded weight of 1180 lbs with a max carrying capacity of 1320 lbs to give a gvwr of 2500 lbs. As long as you keep the towing weight under 1500 lbs when loaded,…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

The fuse likely blew because either there was a short on the trailer wiring somewhere or the lights on the trailer draw more than 7.5 amps. The first things to check are the vehicle and trailer side connectors. Make sure each is free of dirt and…

The etrailer.com Trailer Hitch Receiver #e98868 will fit Honda CR-Vs in the year ranges 2012-2016. Included is a customer picture of how it looks installed and a video resource for additional information.

For your 2015 Honda CR-V, I recommend the Tow Ready Custom Fit Vehicle Wiring #118561. This wiring harness will plug into the existing factory wiring in your CR-V, as you've seen in the installation videos. The connectors that plug into the…