Trailer Hitch Installation - 2007 Ford F-250 - B&W Video

I went out to the warehouse and pulled the B&W Heavy-Duty Trailer Hitch #BWHDRH25230 and measured the distance from the rear mounting hole to the end of the receiver and found it is 26 inches. Check out the image I made of this measurement.

There sure is! What you will need is a pole tongue adapter like the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW #EQ95-01-5950 which will allow you to use a Equal-i-zer or Fastway e2 weight…

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

The Curt hitch you mentioned is more of a multi fit hitch and would not be the best choice for your truck, but we do have a couple options. The closest fitting, but still probably not close enough would be the #37133 which has it's hitch opening…

A lot of newer trucks can have wheels larger than 16 inches. But since your spare is a 16 inch it will fit in the factory location on your 2003 Ford F-250 with B&W trailer hitch #BWHDRH25230 installed. I have included a link to the installation…

I would be happy to help! Both the Draw-Tite Class V Trailer Hitch Receiver #DT45508 and the B&W Class V Trailer Hitch Receiver #BWHDRH25230 you were looking at for your 2004 Ford F-250/350 King Ranch will stick out from the bumper slightly like…

I spoke with my technical contact at Curt and he informed me that the Curt Hitch #C15810 will fit spare tires with a wheel size of less than 20 inches. We happen to have a Ford F-350 on site, so we checked out the spare tire underneath and it was a…

The SuperSprings #SSA22 would be a smart choice to raise your 2012 Ford F-250 when pulling your fifth wheel. They are designed to prevent the sagging you are experiencing and should put you pretty close to level. If you take a look at the attached…

For your 2016 Ford F-350 Diesel carrying a 1800lb truck bed camper and towing a 20' boat the correct SumoSprings would be the #SS84VR if your truck is 4WD or the #SSR-114-54 if your truck is 2WD. You will not need to add the springs to the front…

The best suspension enhancement kit for your 2004 Ford F-350 dually for your application is the RoadActive Suspension kit part #RAS3611-HD as it gives you the support you are wanting, is easy to install, and unlike other options (including two you…

The Timbren Suspension Enhancement System #TFRTT350J would be my recommendation. These are designed to improve handling and safety by becoming more rigid with weight added. This will help increase stability, reduce the sag you mentioned, and each…

Yes, you can use the Reese Friction Sway control part #83660 without a weight distribution system. You would just need to use the tab part #RP26003 on the ball mount as well.