Measurement of Rear Mounting Hole to End of Receiver on B&W Trailer Hitch # BWHDRH25230

Question

Question:

can you tell me what the measurement is from the rear most frame mounting hole to the end of the receiver?

asked by: Michael

0

Expert Reply:

I went out to the warehouse and pulled the B&W Heavy-Duty Trailer Hitch # BWHDRH25230 and measured the distance from the rear mounting hole to the end of the receiver and found it is 26 inches.

Check out the image I made of this measurement.

expert reply by: Chris O

0

click to enlarge

Answer 1

Curt trailer hitch #C15316 is a custom fit hitch designed to 1999 - 2003 Ford F-250 and F-350 Super Duty Pickups with factory Deep Drop Bumpers, sometimes called a cowboy bumper. The hitch mounting holes are spaced approximately 34-1/2 inches apart…

view full answer...

Answer 2

The B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25230 you purchased for your 2005 Ford F-250/350 was designed and tested with the included 1/2" grade 8 bolts so that is what you will need to use. Enlarging the holes in your hitch can cause…

view full answer...

Answer 3

I would be happy to help! Both the Draw-Tite Class V Trailer Hitch Receiver #DT45508 and the B&W Class V Trailer Hitch Receiver #BWHDRH25230 you were looking at for your 2004 Ford F-250/350 King Ranch will stick out from the bumper slightly like…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Measurement of Rear Mounting Hole to End of Receiver on B&W Trailer Hitch # BWHDRH25230

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching