Trailer Hitch Installation - 2001 Ford F-250 - Curt Video

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

I recommend the Equal-i-zer Weight Distribution System #EQ37140ET. Using this system you will also get sway control to make things much safer when you are driving. This system is rated for a tongue weight of 1,000-1,400lbs and a maximum trailer…

There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…

Actually if you look at the attached photo you can see that we didn't remove the wiring that is mounted to the bumper on the 2003 Ford F-350 when we installed the Curt Trailer Hitch Receiver #C15410. I have attached an installation for you to…

It is not extremely uncommon for the hitch pin hole on a trailer hitch receiver to become oblong after frequent usage. This is usually attributed to frequent back and forth movement of the shank inside the receiver tube opening that in time will…

The Curt hitch you mentioned is more of a multi fit hitch and would not be the best choice for your truck, but we do have a couple options. The closest fitting, but still probably not close enough would be the #37133 which has it's hitch opening…

Valley went out of business a few years ago, so their products are no longer available. I'd recommend the B&W Class V hitch, part #BWHDRH25230. The hitch is a three piece design, with the side plates and center section being individual…

I checked with Curt and they sent me the following dimensions based on your picture for the #C15410. Red line measurement 10.55” Yellow Line measurement 5.32” Green Line measurement is 7.5”

To relocate the 7-Way electrical connection on your 2006 Ford F-350 you can use the Mounting Bracket for Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End, item #PK12711U, and a no drill bracket, item #18136, as long as the 7-Way is similar to…

The Curt Trailer Hitch Receiver #C15410 has a measurement of 12-1/2" from the face of the receiver to the bolt hole nearest the receiver. I have attached a picture showing the dimensions for the bolt holes as well as the receiver distance. The…

I have confirmed with my contacts at Curt Manufacturing, and indeed the towing capacity of the Class V trailer hitch #C15410, is 17,000 pounds with or without using a weight distribution system. Therefore, the maximum towing weight of this trailer…

You will be able to reinstall your spare tire after you install the Curt hitch #C15410 in your 2016 Ford F-250. The fit might be a little tight but since you don't have the 20 inch wheel size it would not be an issue.