Trailer Hitch Installation - 2007 Ford F-250 - Curt C15410 Video

There are three pins on the Pro Series Adjustable 3-Ball Mount part #63070; one to rotate the tri-ball assembly (spindle pin), one to remove the tri-ball assembly (shank pin), and one to hold the shank inside of the receiver tube (hitch pin). In…

The Curt hitch you mentioned is more of a multi fit hitch and would not be the best choice for your truck, but we do have a couple options. The closest fitting, but still probably not close enough would be the #37133 which has it's hitch opening…

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

The Draw-Tite Class V receiver hitch you'd looked at, part #DT45508 would indeed be a fit for a 2015 Ford F350. The existing hitch would need to be removed, and this hitch would bolt in its place. This hitch would be a great choice for your…

In order to find the model number on the Furrion 2-in-1 Range Oven part #FSRE21SABL you will need to pull this out away from the cabinets and then look on the left hand side of the unit for a white sticker with barcode which should then display the…

34 inch wide trailer frame indicates you have a cab and chassis F-350, which we do have solutions for that. But if you have an RV built on a F-350 frame then we don't have a fit that I can guarantee will fit since the rears of those are quite a…

I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting bracket…

To relocate the 7-Way electrical connection on your 2006 Ford F-350 you can use the Mounting Bracket for Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End, item #PK12711U, and a no drill bracket, item #18136, as long as the 7-Way is similar to…

Actually if you look at the attached photo you can see that we didn't remove the wiring that is mounted to the bumper on the 2003 Ford F-350 when we installed the Curt Trailer Hitch Receiver #C15410. I have attached an installation for you to…

Thank you for the excellent photos, and for starters, you are correct that it will help ease installation if you lower the gas tank on your 2005 Ford F-350 Cab and Chassis when installing the Curt Trailer Hitch Receiver #C14048. In regards to…

The Draw-Tite Class IV Hitch, part #41943 will fit the rivet configuration you mentioned (see figure #3 in the instructions I have linked to). I checked with one of my contacts at Draw-Tite, who tells me that this hitch will work with the 34-1/4…

I was able to get the measurement of the distance from the bottom of the frame to the top of the receiver on the Draw-Tite #41943- which is roughly 8.75". Draw-Tite was not able to provide me with the other measurement you're asking for…