Trailer Hitch Installation - 2006 Ford F-350 - Curt Video

I was able to obtain from Curt a chart showing key dimensions for their 3-Piece Trailer Hitch #C15511 (and other hitch models) that I linked for you. This shows that for hitch #C15511 the overall front-to-back length is just under 24-inches. The…

The Curt Trailer Hitch Receiver #C15410 has a measurement of 12-1/2" from the face of the receiver to the bolt hole nearest the receiver. I have attached a picture showing the dimensions for the bolt holes as well as the receiver distance. The…

There are three pins on the Pro Series Adjustable 3-Ball Mount part #63070; one to rotate the tri-ball assembly (spindle pin), one to remove the tri-ball assembly (shank pin), and one to hold the shank inside of the receiver tube (hitch pin). In…

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

Actually if you look at the attached photo you can see that we didn't remove the wiring that is mounted to the bumper on the 2003 Ford F-350 when we installed the Curt Trailer Hitch Receiver #C15410. I have attached an installation for you to…

The Curt hitch you mentioned is more of a multi fit hitch and would not be the best choice for your truck, but we do have a couple options. The closest fitting, but still probably not close enough would be the #37133 which has it's hitch opening…

For your 2016 Ford F-350 Diesel carrying a 1800lb truck bed camper and towing a 20' boat the correct SumoSprings would be the #SS84VR if your truck is 4WD or the #SSR-114-54 if your truck is 2WD. You will not need to add the springs to the front…

The best suspension enhancement kit for your 2004 Ford F-350 dually for your application is the RoadActive Suspension kit part #RAS3611-HD as it gives you the support you are wanting, is easy to install, and unlike other options (including two you…

The SuperSprings #SSA22 would be a smart choice to raise your 2012 Ford F-250 when pulling your fifth wheel. They are designed to prevent the sagging you are experiencing and should put you pretty close to level. If you take a look at the attached…

The Timbren Suspension Enhancement System #TFRTT350J would be my recommendation. These are designed to improve handling and safety by becoming more rigid with weight added. This will help increase stability, reduce the sag you mentioned, and each…

The front two mounting bolt holes are 3 inches apart on the Draw-Tite Ultra Frame Trailer Hitch Receiver #41943, and 16-1/4 inches from the front mounting hole to the furthest. The height is 6 inches as well; this is only a fit for 1999-2021 Ford…

The correct quick splice harness needed to install a brake controller in a 20014 Ford F-350 is the part #3035-P. I attached a picture that shows how the connector of it would match what you have in your truck. This could be used as a guide or you can…