Trailer Hitch Installation - 1999 Ford Ranger - Curt Video

When installing the Curt Front Mount Hitch, #13138 on a 1997 Ford Ranger, you will need to enlarge some access holes but you will not be drilling any new holes. Please note that this hitch will not fit models that have a front cross-member…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

Longview custom towing mirrors #CTM2200A are listed as a fit for a 2003 Ford Ranger. This is currently the only custom fit towing mirror set we have for the 2003 Ford Ranger. I have linked a video showing an example installation for you.

I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit, part #75082, for the same reason that you mentioned. The bar of the hitch is hidden behind the bumper. This hitch receiver is a Class III receiver with a maximum…

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

The Curt hitch that fits your 2008 Ford Ranger part #13019 fits with a full size spare. I attached a picture that shows the hitch installed along with a full sized spare.

That is a great question. There are three Class III trailer hitches available that are confirmed to fit your 2018 Honda CR-V. As you mentioned, the etrailer.com #e98848 and the Curt #C13397 both feature a square crosstube while the Draw-Tite #76128…

It is difficult to identify what hitch fits just by looking at the holes in the frame. However, I can tell you that the Curt Trailer Hitch Receiver #13138 is confirmed to fit your 2004 Ford Ranger Edge. This is a Class III hitch with a 2"…

I spoke with my contact at Curt and he provided a picture to show what to look for when it comes to determining whether your 2000 Ford Ranger has the front crossmember. You will see his picture off to the right. If your Ranger DOES NOT have a…

We don't carry a crank handle specifically for the Coleman Tent Trailers, but we do have many cranks that may work depending on your specific camper. If you are looking for the crank to raise the tent of the camper, I believe what you are looking…

The hitches we carry for the 1996 Mazda B3000 like the Curt #13138 fit models from 1994 to 2010 so yes a hitch from a 2001 would also fit a 1996 model.

I confirmed with my contact at Curt Manufacturing that their 2-inch Class III hitch part #13138 is a fit on your 2000 Ford Ranger Stepside. The linked installation video illustrates the mounting process on a 1999 Ranger. Drilling is required. The…