Coleman Crank Handle To Raise Tent Of Pop-up Camper

Question

Question:

Needing a crank handle for a Coleman tent trailer it an 87

asked by: Cory V

0

Expert Reply:

We don't carry a crank handle specifically for the Coleman Tent Trailers, but we do have many cranks that may work depending on your specific camper.

If you are looking for the crank to raise the tent of the camper, I believe what you are looking for and recommend is the Ultra-Fab T-Slot Power Drill Adapter for Scissor Jacks # UF48-979071 that is designed to work with most scissor jacks but should work for this as well. For the manual crank you can use the Replacement Manual Override Crank for Bulldog Powered-Drive Trailer Jack # BD500203.

If you are looking for something different, please give me some more info and I'd be happy to assist.

expert reply by: Jason S

0

Answer 1

The trailer hitch that I recommend for a 2020 Ford Ranger is the Curt Trailer Hitch Receiver part #C13417 which is a custom bolt-on fit that does not require any cutting or drilling. The process should actually only take you around 20 to 40…

view full answer...

Answer 2

I'd be happy to help you out! The trailer hitch I recommend for your 1997 Ford Ranger is the Draw-Tite Max-Frame Trailer Hitch Receiver #75082 because it sits nice and snug up against the bumper for a clean looking aesthetic. To add a brake…

view full answer...

Answer 3

Name brand drills like Milwaukee or DeWalt are always a good choice. Go with something that is at least 18 volts but the higher the better because it will be easier for the drill to operate the jacks using the drill adapter #UF48-979071.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Coleman Crank Handle To Raise Tent Of Pop-up Camper

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching