Trailer Hitch Installation - 1996 Ford F-150 - Curt Video

The B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25122 that will fit your 1986 Chevy K20 will measure 5.438" from the top of the frame brackets to the top of the receiver. If this is looking like it will not be enough to clear the bottom of…

I am unfamiliar with the Barden Bumper and in my research, I could not find any specific information regarding the Barden Bumper. Our trailer hitches are not tested with aftermarket bumpers. We have two bumpers that have been determined to be a fit…

The #BWHDRH25122 measures 5 inches from the frame to the top of the hitch receiver. The #BWHDRH25198 measures 7-3/8 inches from the frame to the top of the receiver.

The mounting holes the Curt Trailer Hitch Receiver #14053 measure 38-1/4" and 38-3/4" width-wise and then from the center of the of the forwardmost to the rearmost is 13-1/4". Attached is a dimensional photo for you to reference. This…

We offer several classes of hitch receiver for the 1996 F-350 and the particular version of the truck you have will determine what options will work for you. With the link provided you can use the drop-down menu at the top of the page (Select Vehicle…

I went out to the warehouse to measure the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25132 for you. The inside bracket measurement is 33-3/16 inches. The outside bracket measurement is 37-11/16 inches. I've attached a photo to assist.

I spoke with my contact at B and W and he informed me that the center section of the B and W Hitch part #BWHDRH25124 measures 31-13/16 inches long measured from outside of flange to outside of flange.

The B and W Hitch part #BWHDRH25122 would fit your 1995 Chevy Silverado 3500 if it was built on a cab and chassis model. Which easy way to determine this is to measure the truck frame from outside to outside. If this measurement is 34 inches then you…

The #BWHDRH25122 has 35-5/8 inches between mounting holes like what you see in the picture I attached. Since you need larger than than let me know what vehicle you have and I can see which would be best fit.

From the top of the mounting plates to the top of the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25124 receiver is a 5-1/4" drop and then from the rearmost bolt hole to the end of the receiver is 10-7/8" (see attached).

The highest rated available trailer hitches I can find for a 1996 Ford Bronco are Class IV hitches. We carry the CURT Trailer Hitch, #14001. This hitch does not fit cab and chassis models or models with a roll pan bumper. It is a Class IV hitch rated…

For a hitch for your 1990 Ford Bronco you would want the part #C15300. I attached an install video for you to check out as well.