Titan Brake Assemblies Uni-Servo Wheel Cylinder Installation Video

The Atwood Hydraulic Braking Assemblies 84210 are no longer made so replacement parts for them are not easily found. If you wanted, you could scour the internet and you might have luck finding someone with replacement parts for these in stock. That…

The 4 mounting bolts on the Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 7" - Left and Right Hand Assemblies - 2.5K #23-398-399 you were looking at are 2-3/4" apart on center or 4" apart when measured diagonally and will fit your…

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…

What you describe isn't normal. Trailer axles are manufactured with a bow or crown in them, a slight arc with the high side on the top of the axle. When the trailer is loaded, the axle will straighten out so the tires make even contact with the…

It's definitely way less work to keep what you have, surge brakes, than it is to convert everything to electric. Personally I'd just stick with surge brakes, as the only benefit you really get to electric brakes is the adjustability of the…

We do carry the following parts for the Titan Hydraulic Brake Kit #T1878800-700 that you referenced: Uni-Servo Wheel Cylinder RH - #T0977600 Uni-Servo Wheel Cylinder LH - #T0977700 Adjuster Spring - #046-083-01 Shoe Return Spring - #BP07-105 As well…

The correct replacement wheel cylinder for your hydraulic trailer brake assemblies is determined by the brand and size of brake assembly that is on your trailer. The Titan Uni-Servo Wheel Cylinder, item #T0977700, that you referenced will fit Titan…

I have some measurements of Uni-Servo Wheel Cylinder for 10", 12" and 13" Titan Brake Assemblies - Zinc - LH Item #T0977700 for you. The plunger inside has a 1.12 inch outer diameter. The rubber parts fit over a 1.5 inch diameter. And…

The Replacement Shock Absorber Spring Kit #TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake…

I have attached a video for you to help you bleed the surge brakes and also given an explanation below. You want to top off the master cylinder and pump the fluid from the master cylinder. You can do this by unbolting the plate that holds the lever…

That will depend on what actuator and brake assemblies you have installed on your trailer. Your best option would be to check out the link I attached that has all of the actuators we carry so that you can identify what you have and then check out the…

The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.