Review of Reese Weight Distribution - WD With Sway Control - RP66073 Video

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I…

You are definitely on the right track here. When it comes to weight distribution hitches, it all comes down to your tongue weight. All of these systems will have a range of tongue weights that you want to stay within for them to work effectively. I…

When using the Curt TruTrack Weight Distribution System w/ Sway Control #C17499, which is a great system for your trailer weight and vehicle, you will initially setup your system just like you would a ball mount. So you will measure from level ground…

The biggest difference between an Equal-I-Zer friction style sway control and a system like a Reese Dual Cam High-Performance Sway Control #RP26002 is that the friction style is passive and the dual cam is active. What is meant by that is that the…

I highly recommend the Reese Strait Line over the Blue Ox. Both systems are about the same degree of difficulty to install, but the Strait Line features the only sway control on the market that works to prevent sway before it starts. One of the…

Yes, the cam of the Reese Dual Cam III part #RP65FR has been upgraded from models that were made 20 years ago. The brackets have also been upgraded and made to be a lot easier to install as well.

Weight Distribution is a good idea whenever the loaded weight of the trailer weighs more that 50 percent of the tow vehicles weight. In addition to eliminating the squat experienced when a trailer is connected, a weight distribution system has other…

For a weight distribution shank that has 2 more inches of drop than the part #RP54970 you'd want the part #RP63971.

Thanks for reaching out and providing photos! The head of your Reese Weight Distribution System part 113913 is designed to fit a shank with flush sides where the bolts secure like what we see with part part #RP54970, but the Replacement Hitch Ball…

The overall length of the Replacement Trunnion Spring Bar part #RP22225 from the end of the trunnion to the end of the bar is 33". I have attached a photo with this measurement for you as well. This spring bar is a direct replacement for Reese…

I do recommend you use a weight distribution system on the Intech Explore Travel Trailer while towing with your 2018 Toyota Highlander. The reason for this is because the weight of the trailer will be over half the weight of the vehicle which is the…

There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…