Review of Blue Ox Weight Distribution Hitch - 20K SwayPro for Underslung Couplers - BXW2003 Video

If your loaded tongue weight is 1,350 lbs then the Reese WD System part #RP66131 that you referenced would be correct for you as it has a tongue range of 800 lbs - 1,500 lbs and yours falls in that range. Be sure that you are considering the weight…

Yes, 2-5/16 inch ball #63840 will fit Reese weight distribution system #RP66131. The shank length and diameter matches what the system requires.

We used to carry the Reese Mini Weight Distribution System that you have and we know that it used a standard weight distribution shank like the Reese part #RP3344 that you referenced. Since you were looking for a drop of 9 to 11 inches of drop this…

Yes, they do. The Blue Ox Sway Pro item #BLU54TR and item #BXW2003 are a couple of our most popular weight distribution systems that include the 2-1/2" shank. If you already have a weight distribution system, or want to go with a different…

The difference between the two Blue Ox weight distribution systems is the type coupler they are designed to use with on the trailer frame. The #BXW2000 is designed for standard couplers that attach to the top of the trailer frame whereas the part…

For V-nose trailers like yours the solution for attaching the side frame brackets to the trailer is to use bolt on brackets since they do not require clearance above the frame. Reese has the kit part #RP58305 which would work great for you. I…

The Reese Chain Hangers part #RP58305 that you referenced are designed to work on trailer frames no wider than 2-1/4 inches and the hangers are 5 inches wide by 3-5/16 inches tall. So if your trailer frame fits those dimensions you should be good.…

You are correct, the Chain Hangers for Reese Weight Distribution Systems, #RP58305, do not work the same way as the lift up brackets. You will need to attach the trailer to the ball mount and then jack up both trailer and truck with the trailer jack.…

We may have something that will allow you to install a weight distribution system on your V-nosed trailer. The bolt-on chain hangers, part #RP58305, provide an attachment point for your weight-distribution spring bars without interfering with…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

Yes, the Air Lift LoadLifter 7500 XL Air Helper Springs #AL86KV that you mention will fit your 2022 Ford F-350 4WD Long bed perfectly! These springs provide your vehicle with up to 7,500 lbs of load-leveling support, resulting in reducing strain on…

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…