Reese Hitch Cargo Carrier Review - 2021 Toyota C-HR Video

I was able to get an updated version of the installation instructions of the Curt Trailer hitch part #C11402 for the 2016 Hyundai Sonata with under body panel. The the 2-3/4" X 5-1/2" square is cut out between the tabs on the panel…

The Draw-Tite #24965 and Curt #C11402 are a lot alike. They both install on your 2018 Hyundai Sonata in basically the same fashion and have the same weight capacities. They do look a little different because the Draw-Tite has a square cross tube…

When we installed the Curt hitch #C11402 on a similar 2018 Hyundai Sonata to your 2019 model we found that from the top of the hitch down to the ground measured 10-1/2 inches. Since Class 3 hitches are only available for higher capacity vehicles…

We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4" hitch on your 2016 Nissan Altima. I recommend the adapter #e43YR. This is 6-1/2" long and will go in to your 1-1/4" hitch and give you a 2"…

When you use a hitch adapter like the part #HTAD you cut the capacity of the hitch in half. The bike rack would not be affected, but the hitch and frame of the vehicle where the hitch attaches would potentially be affected if you were to overload the…

The Brophy part #HTAD is going to be the best solution we have. This is 7-1/4 inches long and is Class I hitch compatible. You should note that these adapters cut the capacity of the hitch they are installed in by 50 percent. I attached a review…

We offer ball mounts that fit 1-1/4 inch hitches that are compatible with 2 inch hitch balls. For example we have the #3593 which fits that hitch size and then for a 2 inch hitch ball we have the #19258.

The best hitch for your 2023 Honda HR-V is going to be the Curt Trailer Hitch item #C68DR. This hitch is custom fit and bolts to your Honda with included hardware. I really like this hitch because it mounts between the bumper bar and your bumper…

Yes we do have a trailer hitch that fits your 2023 Honda HR-V with the part #C68DR which has a 2,000 lb towing capacity and 200 lb tongue weight capacity.

Yes, you can use Locking Anti-Rattle, Threaded Hitch Pin #S64027 to lock your 17x50 Swagman Expanse Cargo Carrier #S68FR to a 2" trailer hitch receiver. I attached a helpful demonstration video for you.

Yes, the Draw-Tite Sportframe Trailer Hitch Receiver #24951 will fit your 2018 Chevrolet Cruze Diesel Hatchback. The distance from the ground to the inside edge of the receiver tube measures 9-1/4". Since you will be towing you will also want…

We only have one hitch that fits the hatchback diesel versions of the 2018 Chevy Cruze and that's the Draw Tite part #24951.