How High Does Curt Hitch C11402 Sit Above Ground On 2019 Hyundai Sonata

Question

Question:

What is the drop of the Curt C11402? Do any of the Curt Class 3 Multi-Fit Trailer hitches have a similar drop?

asked by: Jim K

0

Expert Reply:

When we installed the Curt hitch # C11402 on a similar 2018 Hyundai Sonata to your 2019 model we found that from the top of the hitch down to the ground measured 10-1/2 inches. Since Class 3 hitches are only available for higher capacity vehicles that are much larger non are available. Also we do not have any multi-fit hitches that would be reasonable to try and fit on your vehicle either.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I was able to get an updated version of the installation instructions of the Curt Trailer hitch part #C11402 for the 2016 Hyundai Sonata with under body panel. The the 2-3/4" X 5-1/2" square is cut out between the tabs on the panel…

view full answer...

Answer 2

You are correct and the upper arms are narrower than the basket at the bottom of the Viking Solutions Carrier part #310-VSR201. The top one is going to have an inside dimension of 29-1/2 inches long, by 14-3/4 inches wide. The bottom basket is…

view full answer...

Answer 3

The ball mount you get to pair with the Curt Trailer Hitch Receiver #C11402 on your 2018 Hyundai Sonata ultimately depends on the height of the trailer coupler that you're towing. A general rule of thumb is that smaller trailers will have a…

view full answer...

Answer 4

Yes it does; per the manufacturer the correct Draw-Tite trailer hitch that fits your 2023 Hyundai Sonata hybrid is the following: - Draw-Tite Sportframe Trailer Hitch Receiver #DT74MR

view full answer...

Answer 5

There are differences in them but we do have what you are looking for and they can in some situations be used together. The Replacement Trailer Hub Bearing you have part #02475 and Replacement Race for 02475 Bearing part #02420 are designed to work…

view full answer...

Answer 6

I can confirm that the heat shield will have to be removed to install the Curt Trailer Hitch item #C23HR on your 2021 Hyundai Sonata. The heat shield mounts on the frame where the trailer hitch will sit so it has to go. I have attached a screenshot…

view full answer...

Answer 7

When we installed the Draw-Tite Sportframe Trailer Hitch Receiver #24872 on a 2014 Ford Focus Hatchback in our shop we found the receiver height to be 10-3/4" from the ground. The Draw-Tite Drawbar #3593 gives you a 2-1/8" rise so that…

view full answer...

Answer 8

The orientation your Class I Drawbar, part 3593 will depend on the height of the trailer coupler. With the trailer level, measure from the coupler down to the ground. This is the approximate height you'll need the trailer ball to be. You'll…

view full answer...

How High Does Curt Hitch C11402 Sit Above Ground On 2019 Hyundai Sonata

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching