2-1/2 inch Hitch 2016 Ford F-350 Locking Hitch Pin Recommendation

Question

Question:

What locking hitch pins will work on my 2016 F-350 hitch? My normal locking pin is not long enough.

asked by: Jared

0

Expert Reply:

Sounds like you have a 2-1/2 inch hitch on your 2016 Ford F-350 and need a longer hitch pin lock to fit it. The part # e98881 would be exactly what you would need since this lock is designed to fit 2-1/2 inch hitches.

expert reply by: Jameson C

0

Answer 1

A great style of bike rack for front hitches is the platform style. This will increase visibility when driving. A great bike rack for this is the Thule T2 Classic 2 Bike Platform Rack #TH9045, its is a great fit with your trailer hitch #65003. Most…

view full answer...

Answer 2

The most accurate way to spec out a weight distribution system is to positively determine the tongue weight of the RV when it's fully loaded up as you'd typically have it when towing. To that figure, you'd add the weight of anything…

view full answer...

Answer 3

We do have a way for you to lock your ball mount to your hitch receiver but unfortunately, the Blue Ox #BX88212 is not able to be keyed alike. For another solution,our etrailer.com lock #e98881 fits 2-1/2 inch Class V hitch receivers and can be keyed…

view full answer...

Answer 4

A great American made hitch lock option is the etrailer Trailer Hitch Receiver Lock #e98881 This lock is for both 2" and 2-1/2" trailer hitches, and is rated for up to 15,000 lbs. It is also made of steel but is double chrome plated so it…

view full answer...

Answer 5

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 6

To keep your back end from squatting, I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1094R. These insert into your rear springs and keep your suspension from being pushed down by the weight of your…

view full answer...

Answer 7

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

view full answer...

Answer 8

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Answer 9

Yes, your Champion 200961 will fit the TorkLift Lock and Load SideKick Cargo Tray #TLA7901. The inside dimensions of the tray are 21-1/4" long x 16-1/8" wide x 3-15/16" deep. The 200961 is 17.3" long x 12" wide so it…

view full answer...

Answer 10

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 11

Thanks for the photo, that was a big help. And the answer is yes, your 2023 Ford F-350 Cab & Chassis is 100 percent compatible with the Curt 7-way: - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C69CR…

view full answer...

2-1/2 inch Hitch 2016 Ford F-350 Locking Hitch Pin Recommendation

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching