Curt Trailer Hitch Installation - 2021 Honda CR-V C13397 Video

We do have a diagram which shows where you need to trim when installing the Curt #C13397. I have attached a picture below which shows the measurements from the Curt instructions. We have installed this hitch with and without cutting the underbody…

The best hitch for your 2024 Toyota RAV4 is the etrailer Trailer Hitch Receiver #e23ZR. This custom-fit Class III hitch has a 2" receiver and a bolt-on installation. It also has a concealed cross-tube so only the receiver will be visible…

The best looking hitch for your 2024 Toyota RAV4 Hybrid is the etrailer Trailer Hitch Receiver #e23ZR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a concealed cross tube so only the receiver will be…

I'd be happy to help with that. I'd recommend the Curt Class III hitch that you'd looked at, part #C13397. Curt and Honda both state that there isn't a hitch fit for the 2021 CR-V Hybrid model, but if you look at the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Rust resistance is going to be the same for all of the hitches listed for your 2022 Toyota RAV4 since they all have the same standard of powder coating used for protection. I recommend going with the etrailer Trailer Hitch Receiver #e23ZR simply…

The Curt hitch part #C13397 that you referenced is a confirmed fit for the 2022 Honda CR-V hybrid Touring model.

So there are a few important differences between the Draw-Tite Trailer Hitch #76128, Curt Trailer Hitch #C13397 and etrailer.com Trailer Hitch #e98848 that fit your 2019 Honda CR-V, which I'll go over for you. The first difference is the look; as…

I checked with Draw-Tite and they list the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT79MR as a fit for a 2023 Honda CR-V all models so you will be good to go with a Sport Touring. I took a look at some of the review and there were instances…

In order to load your Boomerang bike on the Hollywood Racks Sport Rider #HLY84FR you will need to use a bike adapter bar, #64005, so the hook will be able to hold onto the bike. Like you said the frame tube is very low on that bike so the hook on…

I pulled up some pictures of your Pedego Boomerang and it does have a very low stop through frame. It might be the lowest one I have ever seen actually. What you can do is use a bike frame adapter like part #64005 to provide a horizontal attachment…

The Thule T2 Pro XTR 2 Bike Platform Rack #TH83JV requires a minimum of 1-1/2 inches from the center of the hitch pin hole to the end of the receiver opening of your hitch according the manufacturer, but we have customers that have confirmed it will…