Curt MV Weight Distribution System Installation - 2018 GMC Sierra 1500 Video

The chain lift brackets that come with the Curt MV Weight Distribution System #C17052 have a single 1/2" bolt that is used to secure the bracket to your trailer frame. The instructions call out to turn the bolt until it makes contact with your…

The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…

Though I do have another option available, there currently is not a weight distribution system manufacturer that makes a system with bars that are 40" long. At least not that I am aware of anyway. With that said, you will need to use a chain…

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

If you choose a hitch that is too light for your application it will not be effective. If you choose a hitch that is too heavy, you'll suffer a rigid ride and a bouncy trailer. Ideally you want a system that has a tongue weight capacity where…

All of the hitch fits we have for your 2013 Ford E-250 Cargo Van are going to stick out a decent amount behind the rear bumper. There isn't a way around it so if you wanted the higher capacity hitch the part #41906 would be a great option since…

The 10,000 lb Curt MV Weight Distribution System #C17052 isn't too wide for your trailer but it may be too long. A lot of times with V-nose trailers what ends up happening is you have to install Chain Hangers for Curt Weight Distribution Systems…

With the design of your Legend Trailer V-Nose I recommend using the Tuson Asymmetric Sway Control #335TSC-1000. The positioning of the jack in combination with the trailers tongue are going to make it impossible to use a traditional weight…

Atwood is no longer in the coupler business so we can't get you the repair kit you are in need of. The best solution we can offer is a similar a-frame coupler that fits a 2 inch ball like the etrailer #CA5100B.

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

The Atwood AMPlock Underslung Coupler Lock part #AT89006 as the name states is for underslung trailer couplers, which is not what you have. You have an overslung trailer coupler therefore the AMPlock won't work. It also only fits trailers with a…

Atwood is no longer in business, and because repair kits and replacement parts are manufacturer specific, the best option available is going to be a replacement A-frame coupler. While I'm sure this isn't the news you wanted to hear, there are…