Curt Heavy Duty Forged Ball Mount Review C83JR Video

The best options for towing a gooseneck trailer for a 2018 Ram 3500 will be long bed, diesel engine, dually. The cab style will be determined by how many people you will be traveling with most likely. You should note that the wider the doors, the…

Good news! I was able to find the 1-1/2 inch 12pt socket with the 3/4 inch drive made of chromium-vanadium steel construction. The part number you are looking for is #ALL643210.

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

We do have a front mounted receiver option that would work for your truck, but the Draw-Tite #65078 isn't a good fit for the Denali trim. The Denali front clip is different than the other trim levels, and in order to install the hitch major…

The Reese Titan accessories used to have more squared edges and the Ford Super Duty 2-1/2 inch receiver requires something with more rounded edges like #AMSCV-2. It still may be a tight fit and in those cases, usually if you remove some of the powder…

The 33-1/2 inch long crossbar pads from Rhino-Rack #RRRWP05 can be used on all bar styles and would work great for your application. I attached a review video for this rack for you to check out as well.

On the Curt Adjustable Ball Mount part #C45902 the distance from the nearest hitch pin hole to gusset measures 3 inches and then from the furthest pin hole 4 inches.

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

We do not carry a tool that will help install your races, though I can pass on some information for you that might be helpful. To install your races, this is what you'll want to do, according to our help article on replacing bearings, races and…

For the perfect locking hitch pin with the Curt Heavy Duty Forged Ball #C83JR, I recommend the etrailer Hitch Receiver Lock #e98881. This lock is made specifically for 2-1/2" hitches and accessories. If you need a bag to hold your ball mount and…