Curt Hitch Cargo Carrier Review - 2019 Buick Enclave Video

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the…

Exhaust melting cargo on a cargo carrier isn't a super common problem, but we are aware that it does happen on occasion. Especially if the cargo carrier is at the same height as the exhaust, relatively close to it, and/or the material in…

I spoke with my contact at Tork Lift and he informed me that the TorkLift Lock and Load #TLA7752 that you referenced has a 500 lb capacity. I attached a review video for you to check out as well.

The tray dimensions of the #TLA7752 are 27-3/4" long x 24" wide and the strap adjustment range is 13-3/4" long x 6-3/4" wide x 13-1/4" tall as a minimum and 27-3/4" long x 23-1/2" wide x…

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

The best hitch for your 2023 Honda Passport is going to be the Curt Trailer Hitch Receiver item #C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it installs right below your rear…

There is not a way to attach the Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers, part #20174, without it protruding into the 24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs, part # e98874. I…

You could pretty easily attach your license plate to the mesh flooring of the Curt Cargo Carrier part #C18151 by using zip ties so that it would be visible when folded up. In the folded up position the taillights should still be visible if they were…

Yes, the two are compatible! You can use the Anti-Rattle Trailer Hitch Receiver Lock #63232 with the 23x60 Curt Cargo Carrier #C18151. This will both lock and steady the cargo carrier in your hitch. I have added links to video reviews of both for you…

The Curt Cargo Carrier #C18151 is an excellent option for a carrier to not have to worry about exhaust. The reason is it extends a full 19 inches from the center of the hitch pin hole to the closest part of the carrier. That means there is far more…

To connect your vehicle that has a 4-Way flat connector to your trailer that has a 7-Way connector, you will need to install a 7-Way on the rear of your vehicle. If you just want or need the tail light functions to operate on your trailer you will…

In most cases Loctite is not required when installing a trailer hitch, but it would not be a bad idea. I suggest using the Loctite Blue Stick Threadlocker, #LT37643, which will provide a secure grip and protect against water and grime.