Curt Hitch Cargo Carrier Review - 2020 Kia Telluride Video

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…

There is one hitch available for the 2023 Kia Telluride. It is the etrailer Hitch item #e45ZR. This hitch is custom fit and bolts to your Telluride with included hardware. I confirmed with the manufacturer this also fits the 4WD models. I really like…

I have a solution for you but I don't have any options for heat shields to protect your cargo when mounted on the Flint Hill Goods Cargo Carrier item #FHG27ZR. This will be an issue with any cargo carrier or accessory you mount on your Forester…

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…

Exhaust melting cargo on a cargo carrier isn't a super common problem, but we are aware that it does happen on occasion. Especially if the cargo carrier is at the same height as the exhaust, relatively close to it, and/or the material in the…

The Solera Awnbrella Support Kit for 8' Projection RV Awning part #LC362237 will prevent the canopy from sagging or flapping in the wind but it's still advisable to retract the awning during heavy winds. If you can still see the canopy…

For your 2016 Subaru Forester, the installation instructions for the Curt Class III Trailer Hitch #C13144 never say to reinstall the heat shield over the exhaust, which is why it is not shown in the video. If you'd like to reinstall the heat…

The Dimensions for the UWS 48" Standard Chest #UWS01022 are as follows. I have also included a picture of these to clear up any confusion. Base Length: 47" Base Depth: 20" Lid Length: 47-7/8" Lid Depth: 20-11/16" Height:…

If you wanted to mount your license plate to the Curt Cargo Carrier part #C18113 you could but we don't have a specific way to do so. You could attach something like the part #LP35BB to it if you'd be willing to modify the carrier. Now that…

As long as the hitch pin hole of your receiver tube isn't recessed more than 5 inches inboard from the furthest rearward part of the rear bumper, the Surco #52015 folding adapter would work fine with the Curt #C18113 carrier installed in the…

We had a customer with a Ram Promaster 2500 just like yours let us know that the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side #PVD20B worked great and allowed full access to the rear doors when it was…

Yes the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks #PVD20B would fit under the rear door of your 2016 Ram ProMaster 3500 to allow you to open it.