B and W Tow and Stow 3-Ball Mount Installation - 2020 Ram 2500 Video

The best option for larger trucks is without a doubt an adjustable ball mount that way you aren't stuck with a fixed ball mount that only works on certain trailers. The best option for this if you have the larger 2-1/2" receiver tube is the…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

I checked out the specs of your 2019 Grand Design Imagine 2250 travel trailer and the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 that you referenced would work well for it. The GVWR of the trailer is 6,695…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

The B&W Tow & Stow 3-Ball Mount part #BWTS20049B has a maximum tongue weight of 350 lbs while using the 1-7/8" hitch ball, 750 lbs while using the 2" hitch ball, and 1,800 lbs while using the 2-5/16" hitch ball.

To determine the amount of rise or drop you need you'll also want to measure from the ground to the bottom of your trailer's coupler. Then find the difference between the 22 inches of your hitch receiver and the measurement of your trailer. I…

Sounds like you are looking for a ball mount. It looks like the 2020 Ram 2500 Crew Cab 4WD diesel comes with a 2-1/2" receiver from the factory. I recommend the B&W Tow & Stow 2-Ball Mount item #BWTS20040B or item #BWTS20049B if you just…

The Durabuilt Hammer Lock Coupling Link for 1/2" Chain #DU96MR you mention, is sold as a two halves equaling 1 link, weighing 1.4-lbs total. I have also attached a review video for you to check out.

I spoke with my contact at Malone who said that the coupler height of the Malone MicroSportXT Trailer #MPG460XT is 15". When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver #76138 on a 2017 Mazda CX-5 the coupler height (from the…

The sticker on the Curt Trailer Hitch Receiver #C13182 is removable, but I strongly recommend against doing so. The sticker contains important information like the Tongue Weight (TW) and Gross Trailer Weight (GTW) ratings. Although I understand the…