Review of InfiniteRule Hitch - Stainless Steel Hitch Locks - IR57FR Video

The B&W Tow & Stow 3-Ball Mount #BWTS20049C comes with 3 stainless steel pins but they aren't locking. If you're wanting to add some security to your Tow & Stow ball mount then We have the InfiniteRule Locking Pins #IR57FR which…

If you just wanted to replace the 3 pins on the B&W Tow & Stow ball mount like part #BWTS20049B , you'd use the part #IR57FR. If you also wanted a keyed alike receiver lock to secure the whole shebang into the hitch receiver, we offer a…

The diameter of the hole on the platform of the #BWTS35100B is 1-1/4 inch so a 1-7/8 inch hitch ball like the part #C48810 would fit.

I have a solution for you, but the small pin included in InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts - Qty 4 #34061775-D is not long enough to work well with a 3" receiver. Instead, I recommend going with the…

In order for a Rack Tamer mud flap to fit on a ball mount there has to be at least 1 inch of clearance on the shank. The B and W Stow and Tow Ball Mounts like part #BWTS20040B would have no problem allowing the Rock Tamer to fit. I attached a picture…

The hitch lock I recommend for the B&W Stow and Go Ball Mount #BWTS10047B, you were looking at, is the #BX8858. Currently, there is no lock available that will replace the adjustable pins on the B&W ball mount. If your coupler is locked to…

The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram. I couldn't find any information on the ANCOR brand so you would need to compare what you have to those dimensions to know if the accessories…

From the top of the receiver to the bottom of the 2-5/16" hitch ball was approximately 10-1/2" for the B&W Tow & Stow 3-Ball Mount with 5" of drop #BWTS10048B that you referenced. See attached picture. So this would hang 8-1/2…

I spoke with B&W about the B&W Companion OEM 5th Wheel Hitch like part #BWRVK3600 and they recommend using the Master Lock 1-9/16" Wide Solid Brass Body Padlock with 2" Shackle part #ML140DLH to lock the handles on the base and it…

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and the…

It sounds like you're looking for the Clevis Adapter for B&W Tow & Stow 2" Ball Mounts - 10,000 lbs #BWTS35100B, which is compatible with the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.