Optronics Tow Bar Wiring - Bypasses Vehicle Wiring - TL21RK Review Video

Describing the strength of the magnets used on the Optronics Magnetic Mount Tail Lights would be fairly difficult, as magnet strength is pretty subjective. The magnet on one of the lamps is strong enough to suspend a 6 pound ball mount, as you can…

The black wire on Roadmaster tow dollies like the #RM-2050-1 will go to the electric trailer brakes. On some units they use a blue wire as well but it does not sound this way on yours. You do have the other wiring correct where white is for the…

Yes, the Optronics Tow Bar Wiring #TL21RK uses very powerful magnets. If you hit a bump large enough to knock one of these free you would have much bigger problems to deal with. Check out the review video I attached for more info.

The battery life for Hopkins wireless magnetic tow lights, #C6304, is going to depend on several factors including the charge level of the batteries used, quality of the batteries, ambient temperature, and of course how long the lights are turned on.…

You can use the Miro-Flex ThinLine LED Trailer Clearance or Side Marker Light - Sumbersible - 4 Diodes - Red Lens #MCL63RB which is 4" long and 1-1/4" tall with 3" spacing between the mounting holes. I've also linked our entire…

Yes, the Optronics ThinLine Clearance or Side Marker Light item #MCL67ABCB is DOT compliant. It is compatible with 12v systems and measures 4-1/8" long x 1-1/4" tall x 1-3/16" deep. It is an amber lens over white LEDs. This is a A…

I recommend using the Optronics Trailer Clearance or Side Marker Light w/ Reflex Reflector - Incandescent - Red Lens #MC44RB, which has mounting holes 3" apart like your existing lights and will be 4" long x 1-1/2" wide. These are an…

A trailer light that only has 1 wire means that it grounds through its mounting hardware. The single wire is the power wire. The best surface to ground a light to is steel. If steel is not available in the area the light installs you can attach a…

The Blue Ox #BLU79FR tow bar wiring kit is a fit for the 2018+ Jeep Wrangler JL, and wouldn't fit your 2017 JK. The good news is, we do offer a plug and play option that will work with your JK. I'd recommend the Hopkins #HM56200 which would…

The Roadmaster Tracker Tow Bar part #RM-020 is designed to be used with a vehicle specific base plate kit. If you're just looking for something that can be bolted on yourself to the bumper or frame with no other parts then I recommend the Tow…

Since the Roadmaster base plate kit you have is a direct connect base plate #RM-521453-5 the correct rock guard is the part #RM-4750.

Since you still have the factory steel bumper on your 2021 Jeep Wrangler JL the Roadmaster base plate kit you'll need is the part #RM-521453-5 which will work great with your Roadmaster Sterling tow bar part #RM-576.