Review of etrailer Trailer Locks - Coupler Locks - E98890 Video

Hey William, InfiniteRule states their hitch locks like the part #34061071-D are made from "high strength" 303 stainless steel and is definitely weldable based on that.

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit…

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

The lock end of the MaxxTow #MT66FR measures .875 which is 7/8 inches in fraction form.

We have the Classic Accessories Toy Hauler Screen #052963799842 that is designed to fit toy haulers. It is 98-1/2" wide x 90-1/2" tall. You could trim it to fit your 80"x80" opening or you could roll up the excess.

The trailer doesn't include locks, which is typical, as trailers don't usually include them. The good news is that there are tons of locking options available, and usually using more than one locking option at a time will deter all but the…

Although Bulldog doesn't offer a keyed alike latch coupler lock, we do offer a similar coupler lock that can be obtained in multiples that are keyed alike. The etrailer brand adjustable coupler lock, part #e98883 is adjustable to fit spans from…

Unfortunately, Bulldog doesn't offer replacement keys, but we can set you up with locks and spare keys. Your best bet for replacement keys, or if you want a lock that you can have multiple keys for would be to go with the etrailer Adjustable…

You can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but…

I went out into our warehouse and pulled a Stainless Steel Trailer Coupler Lock #e98885 and found that the overall diameter of the unit is 1-1/8 inches.

The Erickson E-Track Trailer Cargo Control tracks, #E19146, are intended to mount to the structural components of a trailer. These locations provide the most secure mounting to ensure your cargo remains stable within your trailer during transport.…

For lubricating any lock, a dry lubricant like powdered graphite is recommended. Using grease and oil or spray lubricants like WD 40 can actually attract dirt and grime and make the lock cylinder sticky after a time.