Review of DrawTite Trailer Locks - Hitch and Coupler Lock - BD580404 Video

Hey Bill, so yeah we worded the fit of the lock you mentioned odd but it's not going to fit a 3 inch setup but we can help as we have the Blaylock EZ part #BLTL-60-40D that was designed for 3 inch diameter setups like you have.

You have measured the cover of your pop-up camper exactly right, as it is the closed box width that matters for the right fit, so you'll need one for a 12 foot long pop-up; the covers do take into account things like AC as well in regards to fit.…

Hey William, InfiniteRule states their hitch locks like the part #34061071-D are made from "high strength" 303 stainless steel and is definitely weldable based on that.

Could I see a picture of your coupler by chance? We have the Bulldog Lifelong Trigger-Style Coupler Lock #BD580404 which comes with a trigger lock and a 5/8 inch diameter coupler lock that has a usable span of 2-1/2 inches, but without more info on…

We have the perfect solution for you with the Curt RockerBall, part #C29FR for 2-5/16" ball or #C40047 for a 2" ball. It completely changes your towing experience by reducing jerking and jarring while towing. It absorbs the movement and…

The Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball - 1-1/4" Diameter Shank #C29FR will not work with the Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs #AMSC2 which has a 1 inch diameter ball…

The ball mount platform of the Gen-Y Phantom X part #GY59VR that you referenced whether in the rise or drop position will put the height right at the top or bottom of the hitch openings. So what that means is that if you picked the third opening from…

Due to the thickness of the top of the coupler, you wouldn't be able to lower the pintle all the way when used on a regular coupler. You'd be better off using a coupler lock to prevent the coupler from being unhooked. The best lock for you…

The Cushioned Ball Mount #AMSC12 that you referenced would be perfect for you all things considered. It has the drop you need (12 inches), the length you need (12-1/2 inches from pin hole to ball hole). This should not reduce the hitch capacity of…

It sounds like the ball plunger on the shaft of the Bulldog Trailer Hitch Receiver Lock part #BD580404 has become seized up which would either be from rust of dirt/grime. In order to free the lock cylinder you will want to try tapping it with a…

Fit System is the economy brand of K Source. There are several brand names under the K Source umbrella. The K Source models seem to be the higher quality option. K Source mirrors #KS62093-94G for your 2011 Chevy Suburban have electric operation,…