etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-35-EZ-K Review Video

I am happy to try to help you find a bearing kit for your Bix Tex trailer. Unfortunately we are not able to recommend a bearing kit based off of just the axle capacity. One way to find out your bearing sizes would be to have a Bix Tex dealership…

Thanks for the Picture. What you have there is a 6 on 5-1/2" hub for a 3,500 lb axle. We do have a replacement hub for your Truryde RVD-H-65535 hub. The correct replacement will be part #AKHD-655-35-EZ-K. This will include the hub,…

I spoke with my contact at Lippert and for your trailer axle, you will want to use the etrailer.com Trailer Hub and Drum Assembly #AKHD-655-35-K. This will serve as a perfect replacement for your existing assemblies, with the same inner/outer…

For your application you need the Pre-Greased Easy Grease Trailer Hub and Drum Assembly #AKHD-655-35-EZ-K. This matches all of the specs you mentioned and while it's only rated for 3.5K axles, it will still work for your Lippert 4.4K axle…

We have it, the etrailer Hub and Drum #AKHD-655-35-EZ-K, listed out for a 3,500 lb axle (and we break the math down on the product page) but when it comes to the hub side of things it's more about making sure it physically fits so since the…

Really the only way to tell if you have manual or self-adjusting brakes is to remove the hub and take a look inside. If you can see a cable running at an angle (see included photo), then you have self adjusting brakes like the Electric Trailer…

The hub you describe is a 3500 lb 10 inch hub/drum with a 6 on 5-1/2 inch bolt pattern which uses an L44649 outer and an L68149 inner wheel bearing and a 58846 grease seal. For a replacement, I'd recommend the #AKHD-655-35-EZ-K hub/drum.…

The Dexter 3,700 Lb Axle uses an L68149 inner bearing and a L44649 outer bearing so yes, you can get these bearings with a 6 on 5-1/2" bolt pattern. I am not sure if you're after a hub or hub/drum so I have attached our complete…

I'd recommend the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e57SR which measure 25-1/4" long and have a bit more capacity than your standard 3,500 lb spring so they won't wear out as fast. This means you must…

I do not have the ability to pull an OEM build sheets to see what parts they installed at the factory so we will need to identify what axles you have installed outside of just the weight rating. I have linked a couple help articles that walk…

If the leaf spring part #e57SR that you referenced matches up dimensionally to what your trailer has and has a capacity that is 400 lbs more than needed it would work just fine. Having a bit extra capacity for the leaf springs would not cause an…

You can replace your current springs with higher capacity springs, like #e57SR which are rated for 4,000 pound axles (2,000 pounds per spring), but it isn't going to increase the weight capacity of your trailer. You'll still be…