Upgrading to 6 Lug Hubs on Dexter 3,700 Lb Axle
Question:
I have a jayco with a Dexter axle, D40 capacity 3700lb, Dexter # 9425923, s/n 133287135017, can a 6 lug hub be installed in place of a 5 lug and will it take the same bearings and seal?
asked by: Daniel
Expert Reply:
The Dexter 3,700 Lb Axle uses an L68149 inner bearing and a L44649 outer bearing so yes, you can get these bearings with a 6 on 5-1/2" bolt pattern. I am not sure if you're after a hub or hub/drum so I have attached our complete selection below. The Easy Grease Trailer Idler Hub Assembly part # AKIHUB-655-35-EZ-K for example is a great option if you need an idler hub or the Easy Grease Trailer Hub and Drum Assembly part # AKHD-655-35-EZ-K if you need a hub/drum. These both have a 6 on 5-1/2" bolt pattern and use L68149 and L44649 bearings.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-35-EZ-K Review
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Search Results: st235/80r16
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Q&A: Can 3,500 lb Hub and Drum Be Used for 4,400 lb Lippert Axle
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Left Hand - 4,400 lbs
- Q&A: Self-Adjusting Trailer Brakes For a Lippert 4,400LB Axle On 2017 Aspen Trail 2790BHS Travel Trailer
- Search Results: 10 brake shoes
- Search Results: brake magnet
- Search Results: axletek
- Search Results: electric connector
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles
- Shop: Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies - 3,500 lbs
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Q&A: Does Trailer Wheel Hub/Brake Drum Need to Be Replaced if Inside Surface is Grooved
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-655-35-EZ-K
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: 225255uc
- Search Results: akhd~655~35~ez~k
- Video: Americana Metal Bolt-In Valve Stem Review
- Q&A: Dimensions of Trailer Spindle TRU37FR