Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
Question:
Looking for a hub asenley for a dexter axel 3500 pound 10 6 on 5 or 5.5 hub that is on it the part number is red-h-65535
asked by: Robert S
Expert Reply:
The hub you describe is a 3500 lb 10 inch hub/drum with a 6 on 5-1/2 inch bolt pattern which uses an L44649 outer and an L68149 inner wheel bearing and a 58846 grease seal. For a replacement, I'd recommend the
# AKHD-655-35-EZ-K hub/drum. The hub/drum includes the inner and outer bearings, races, the grease seal, dust caps for both EZ Lube and standard spindles as well as lug nuts. The hubs are pre-packed with grease.
For replacement brake assemblies, I'd go with # AKEBRK-35-SA self-adjusting brake assemblies which after initial setup, will ensure that your trailer brakes stay properly adjusted. The installation hardware for the brake assemblies isn't included. If you don't wish to reuse your existing hardware, you can use # BRKH10B to replace it.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Q&A: Can 3,500 lb Hub and Drum Be Used for 4,400 lb Lippert Axle
- Shop: Trailer Hitch
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-655-35-EZ-K
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-35-K Review
- Shop: Trailer Wiring
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-35-EZ-K Review
- Search Results: 8~201~9uc3~ez
- Search Results: 6 lug trailer brakes
- Search Results: akhd~655~35~ez~k
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: st235/80r16
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-K
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Search Results: axletek
- Search Results: brake magnet
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review
- Q&A: Self-Adjusting Trailer Brakes For a Lippert 4,400LB Axle On 2017 Aspen Trail 2790BHS Travel Trailer
- Search Results: 10 brake shoes
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Q&A: Trailer Hub Wont Slide Onto the Spindle of a Timbren Axle-Less System
- Q&A: Upgrading to 6 Lug Hubs on Dexter 3,700 Lb Axle