Ratchet Strap Length of Erickson E-Track Strap and Ratchet

Question

Question:

How long is the lead length on the ratchet?

asked by: Danny C

0

Expert Reply:

The strap length on the ratchet side of the Erickson E-Track Strap with Ratchet part # EM59136 is 5-1/4 inches.

expert reply by: Jameson C

0

Answer 1

The manufacturer does not provide a weight rating for the Erickson E-Chock Wheel Chock for E-Track, #EM09162. These are designed with overall dimensions of 8-1/2" long x 6-3/8" wide x 4-1/2" tall and to be used with a tie-down strap.…

view full answer...

Answer 2

If you are looking for just the e-track mount ratchet straps which comes with the Erickson ATV E-Track Tie-Down Kit part #EM09160 the closest thing we have is the Erickson E-Track Strap with Ratchet part #EM59136 which is just a slightly longer…

view full answer...

Answer 3

Because LED running lights use much less power than their incandescent counterparts, you should not be in any danger of overloading anything. Because of that, and because your truck already has the 4 pole connector, you do not need a converter. Your…

view full answer...

Answer 4

Good question and the 2,000 lb working load limit (WLL) of the Erickson Horizontal E-Track such as the 5 foot #E19148 is the safe limit for the weight of the cargo the track is helping secure. To simplify, it is the cargo capacity that the track can…

view full answer...

Answer 5

To secure an ATV with 32" tires to a trailer a few components are needed for worry-free transport. The Erickson Horizontal E-Track part #EM59150 is a great system for securing a variety of items, not just your RZR. For your specific need, a set…

view full answer...

Answer 6

Even though you do not have EZ lube axles you will be able to add EZ lube hubs and drums, however, you will not have the EZ lube feature on his axles by installing the EZ lube hub and drums. For you to be able to easily pack grease into your hubs and…

view full answer...

Answer 7

The closest thing to a replacement for the straps that come with the #EM09160 are the Erickson E-Track Strap with Ratchet #EM59136. These are a bit longer at 12' and have a max load of 3,500 lbs with a safe working load limit of 1,165 lbs. The…

view full answer...

Answer 8

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 9

Since you are wanting the most rust proof E-Track I recommend the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 4' Long #e95VR as its galvanized finish will be the best for rust prevention, and will hold up fine even though you…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

view full answer...

Answer 12

That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…

view full answer...

Ratchet Strap Length of Erickson E-Track Strap and Ratchet

Product Page this Question was Asked From

Continue Researching