Does the Erickson ATV E-Track Tie-Down Kit # EM09160 Have to be In-Line with Direction of Travel
Question:
TRAILER....ECHO EE-14-14....14 GA. STEEL DECK Does the Erickson ATV E-Track Tie-Down Kit # EM09160 control front to back movement on a side load metal bed trailer? atv moving sideways to front or rear of trailer. Can you place one on front wheel and other diagonal to rear wheel I.E. lt. front and rt. rear wheels to acomodate loading trailer from either side? Echo trailer uses a 14 ga. steel plank channel lightly welded to frame. Would this be strong enough to anchor to?
asked by: MIKE Q
Expert Reply:
You can use the Erickson ATV E-Track Tie-Down Kit # EM09160 to help secure your ATV but you really need something securing your ATV in the direction of travel.
You could put some Horizontal E-Track like part # E19148 in-line with the direction of travel and do a kind of criss-cross pattern over your ATV with straps like part # EM59136 to help secure it, but Erickson does not recommend securing the load only using a straps that are not with the direction of travel.
As long as your trailer is rated for the weight of your ATV it should be good to go. If you check out customer photos of the ATV Tie Down Kit you will see plently of people have successfully installed these on metal trailers.
Products Referenced in This Question
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- E-Track
- E-Track Straps
- 2 Inch Wide
- 1000 lbs
- 12 Feet Long
- Erickson
more information >
Product Page this Question was Asked From
Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs
- ATV-UTV Tie Downs
- E-Track Ends
- 1 Strap
- Manual
- 6 - 10 Feet Long
- E-Track Strap
- Ratchet Strap
- 1-1/8 - 2 Inch Wide
- 1201 - 1500 lbs
- Erickson
more information >
Continue Researching
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Shop: Erickson E-Chock Wheel Chock for E Track - Powder Coated Steel - Qty 1
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4
- Shop: Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3
- Shop: Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1
- Search Results: etrack backing plate
- Q&A: Weight Rating
- Shop: etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers - Aluminum - Silver
- Search Results: e89rr
- Search Results: e96rr
- Search Results: trailer backing plate
- Video: Review of etrailer Tie Down Anchors - E Track Backing Plate 4 Pack - e66RR
- Video: Erickson E-Track Strap with Cam Lock Buckle Review
- Q&A: Ratchet Strap Length of Erickson E-Track Strap and Ratchet
- Q&A: Chock and Strap Trailer Tie Down System For A 2016 Polaris RZR With 32" Wheels
- Q&A: Can the Ratchet Straps Which Come With the Erickson ATV E-Track Tie-Down Kit Be Ordered Separate
- Q&A: What Does Working Load Limit Mean for E-Track
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Review of Timbren Trailer Leaf Spring Suspension - Axle-Less Suspension - TASR1THDS04
- Search Results: trailer lights
- Search Results: trailer axles
- Search Results: erickson etrack
- Video: Erickson E-Track E-Chock Wheel Chocks Review
- Video: etrailer Horizontal E-Track Review
- Q&A: Can You Install an EZ Lube Hub and Drum on a Non EZ Lube Axle
- Q&A: Are Backing Plates Necessary for Erickson ATV E-Track Tie-Down Kit # EM09160