etrailer Camper Jack - Landing Gear - RVLG-8000 Review Video

I don't have any way of determining if the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear #RVLG-HDL will work with your 2007 Fleetwood Nitrous Hyperlite TT Toy Hauler or not, unfortunately. The Replacement Crank Handle…

We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your…

I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg #LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part #LG-177201.

With the measurements you said you have on your system the landing gear I recommend for you is the Stromberg Carlson Venture Landing Gear. You will need two of the lead legs, part #LG-177202, two gearboxes, part #LG-179015, two motors, part…

To determine the correct landing gear for your 2007 Sportsmen Sportster Toy Hauler 5th Wheel you'll want to measure the weld stops on your current landing gear and find a matching set. You can technically choose one with different weld stop…

The Landing Gear Set w/ Handle #RVLG-8HDL that you're interested in sounds like to be a perfect match for you! This landing gear set has an overall width of 6-1/8" including the foot pad, and the legs itself measure 2-1/2" wide like…

It could be the motor but it could also be the screw/nut inside the jack leg that is causing the problem. Since you mentioned that it is hard to crank it manually I suspect that it is likely the screw and/or nut. On jacks that have an ACME screw the…

Normally when people say they have a 11-1/2 inches they are measuring between the brackets like you mentioned but the measurement to look for is on the outsides which for you would be 15-1/2 inches and the etrailer Landing Gear Set, part #RVLG-8000…

It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you…

From previous customers with your trailer we have determined that your trailer has Lippert landing gear like the part #LC333964 which fits also the description you listed.

In order to determine the correct replacement landing gear for a trailer you need the measure the existing legs. The measurement you're looking for is the length of the outer tube and the distance between the weld stops. I see you're looking…

The Landing Gear Set w/ Handle part #RVLG-8HDL have a one year warranty and they are designed to replace existing landing gear legs with 15-1/2" between the weld stops (inside to inside). I suspect this is what you have as it's an industry…