Review of Valterra RV Water Inlets - RV Gravity Fill Water Inlet Funnel Spout - RF911BK Video

The Taskmaster tire part #TR20515D that you referenced was made in China, even though they are not made in the USA, they are a great tire with great customer satisfaction. These have a weight capacity of 2,150 lbs at 65 psi and a speed rating of 81…

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

If I'm understanding you correctly, you're looking for a replacement for the city water connection on your 2002 Holiday Rambler Alumascape trailer. I recommend using something like the Valterra Water Inlet for RVs #A01-0178LFVP which comes…

I spoke with my contact at Thule and to replace the passenger side taillight wiring harness on your Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier, #TH665C, you will need part #TH05254. If the connection point on the taillight was…

It appears that your 2015 Dutchmen Aspen Trail 2810BHS came with a Valterra Flush Mount Water Inlet #A01-0168BKVP. This is a plastic construction and may explain why you are needing to replace it. I recommend the RV City Water Flange #372160-85-A-36A…

Thank you for the photo, it was very helpful, and I can confirm that your current B&B city water inlet can be directly replaced with an option from JR Products: - White: RV City Water Inlet with Brass Check Valve - 1/2" MPT #372160-85-A-26A…

You do not need to use any pipe tape or sealant of any kind when installing the RV City Water Inlet w/ Plastic Check Valve #372160-85-A-3PA.

The B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package #BWRVK3600 weighs 212 lbs.

Both the B&W Slider #BWRVK3670 and Fixed #BWRVK3600 will fit in the factory prep/puck system that you have in your 2022 Ram 2500 short bed. A sliding hitch is generally used so that if you get into a tight place as most campgrounds are you will…

The Valterra #RF911BK water inlet features a barbed connection that starts out at 1-1/4 inches in diameter at the end and flares to 1-3/8 at the end right behind the inlet. It will fit a flexible hose with a 1-1/4 inch inside diameter. If you're…

The Camco RV Plastic Fresh-Water Fill Hose #CAM36601 is designed to attach to the spout of a water fill inlet like the part #CAM37102 which is ribbed to match.

When installing the Blue Ox SwayPro Weight Distribution w/ Sway Control, #BXW1000, the suggested starting point is to have three full chain links showing under the latch. I have attached a picture, as well as an installation video, for you.